cloud11665

update: I now have access to a 40-series GPU, just need to set up my devenv on windows, and I can take a closer look.

I'll provide bios screenshots once I boot into it. I'm currently trying to boot 128GiB, but it's hanging on memory training. Regarding other tools, I think that they are getting...

re lshw: it reads the SPD eeprom

Something went wrong during post and now the mainboard is not booting even with one stick. I was running 2x32GB at 5600 36-38-38-134 1.4v (the kit is rated for 6000MT/s...

okay, after reflashing the BIOS and clearing CMOS, here are the default DRAM timings as reported in BIOS:    transcribed: -- primary -- Tcl: 40 Trcd: 39 Trp:...

It was tested only with a single DIMM, my bad. here is output with 2 DIMMs ``` Zen UMC [14E0] Controller #0 Dual Channel Bus Rate 1800 MHz Bus Speed...

``` Zen UMC [14E0] Controller #0 Dual Channel Bus Rate 2800 MHz Bus Speed 2800 MHz DDR5 Speed 5600 MT/s Cha CL RCDr RCDw RP RAS RC RRDs RRDl FAW...

Pulled master branch, ran the script again and got same behavior. Originally we were running with `--cont-batching`, but I also tried without it just to get the same behavior. ```sh...

I'd be more for being explicit than implicit, so something like `ab-loop-b=end` or `ab-loop-a=begin`.