Error make AT32

[AnOrdinaryUsser]

Hello everyone,

I saw that the repository could be useful to flash my hoverboard with AT32 processor and I want to see if I am able to get it. However, I am having a little trouble, I have installed everything needed to do the make AT32, but I get this error from the terminal. Can anyone tell me what is going on?

Build for target [AT32] Using custom configuration [0] arm-none-eabi-gcc build/stm32f1xx_hal_flash.o build/stm32f1xx_hal_hal_flash_ex.o build/stm32f1xx_hal_rcc.o build/stm32f1xx_hal_tim.o build/stm32f1xx_hal_tim_ex.o build/stm32f1xx_hal_hal_tim_ex.o build/stm32f1xx_hal_adc_ex. o build/stm32f1xx_hal_cortex.o build/stm32f1xx_hal_gpio.o build/stm32f1xx_hal_rcc_ex.o build/stm32f1xx_hal_pwr.o build/stm32f1xx_hal.o build/stm32f1xx_hal_adc.o build/stm32f1xx_hal_uart.o build/stm32f1xx_hal_i2c. o build/stm32f1xx_hal_dma.o build/setup.o build/control.o build/main.o build/bldc.o build/comms.o build/stm32f1xx_it.o build/BLDC_controller_data.o build/BLDC_controller.o build/system_at32f4xx. o build/startup_at32f403xe.o -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=softfp -specs=nano.specs -TAT32F403RCTx_FLASH.ld -lc -lm -lnosys -Wl,-Map=build/hover.map,--cref -Wl,--gc-sections -o build/hover.elf /usr/lib/gcc/arm-none-eabi/10.3.1/../../arm-none-eabi/bin/ld: build/control.o:/home/sergio/Documents/hoverboard-firmware-hack/Src/control. c:19: multiple definition of hdma_i2c2_tx'; build/setup.o:/home/sergio/Documents/hoverboard-firmware-hack/Src/setup.c:225: defined for the first time here /usr/lib/gcc/arm-none-eabi/10.3.1/../../arm-none-eabi/bin/ld: build/control.o:/home/sergio/Documents/hoverboard-firmware-hack/Src/control. c:18: multiple definition of hdma_i2c2_rx'; build/setup.o:/home/sergio/Documents/hoverboard-firmware-hack/Src/setup.c:224: defined for the first time here /usr/lib/gcc/arm-none-eabi/10.3.1/../../arm-none-eabi/bin/ld: build/comms.o:/home/sergio/Documentos/hoverboard-firmware-hack/Src/comms.c:8: multiple definition of huart2'; build/setup.o:/home/sergio/Documentos/hoverboard-firmware-hack/Src/setup.c:46: first definition here /usr/lib/gcc/arm-none-eabi/10.3.1/../../arm-none-eabi/bin/ld: build/BLDC_controller_data.o:/home/sergio/Documents/hoverboard-firmware-hack/Src/BLDC_controller_data. c:97: multiple definition of rtP'; build/main.o:/home/sergio/Documents/hoverboard-firmware-hack/Src/main.c:37: defined for the first time here collect2: error: ld returns 1 output status make: *** [Makefile:224: build/hover.elf] Error 1

Translated with www.DeepL.com/Translator (free version)

[AnOrdinaryUsser]

Or when i do a make clean i get this:

Build for target [AT32] Using custom configuration [0] Create target lock file for AT32 echo "" > ./build/target_at32 /bin/sh: 1: cannot create ./build/target_at32: Directory nonexistent make: *** [Makefile:178: pre-build] Error 2