New features ?

[LeMaitre4523]

Hello, I come to the news, find out if this project is still news after 2 years

[cjj25]

I've not updated the repository in a while but I'm still monitoring and answering any questions.

[LeMaitre4523]

So the implementation of features in the TODO of readme is not planned

[cjj25]

They're still on the TODO but when I have some spare time available

[LeMaitre4523]

Okay, do you have any idea how long it’s gonna take you?

[cjj25]

I have no immediate plans with my current work load. What feature do you need exactly?

[LeMaitre4523]

Mainly the PTZ Control function, the rest is secondary

[cjj25]

Which device do you have specifically?

[LeMaitre4523]

I own an IP dome camera of the Keyke sub-brand

[cjj25]

Do you usually control it via the Yi app? Yi usually has its GPIO pin map in the custom kernel module that's loaded

[LeMaitre4523]

Yes absolutely, I control it with the YI IoT app

[cjj25]

I can't do anything at the moment but you're welcome to provide a copy of the dump from the firmware.

Then when I do have a spare moment, I'll use your firmware as a test as most of the firmware I've used are non pan/tilt so it'll be useful to compare the kernel module.

[LeMaitre4523]

Yes no worries, do you know a way to do it?

[cjj25]

There should be a folder called "backup" on your SD card. If you zip this up and send over via WeTransfer then I'll give it a download.

[LeMaitre4523]

I have no folder name backup, the SD card remains empty

[cjj25]

Have you followed the instructions on the front page of this repo?

[LeMaitre4523]

Indeed I did not understand that I had to install the hack

[LeMaitre4523]

Hello, so today I try to install the "hack" on my camera but the problem is that the camera does not seem to accept it, it normally starts without more. I have followed the README and the version number is the same

[LeMaitre4523]

Hello, I come back here, I got back on my camera, and I still had the problem that the camera was not running the "hack" and I realized that the V03 does not have a Factory folder while the other two versions have one, is that the problem? And I was able to backup the firmware

[cjj25]

The V03 uses a different payload to start the camera application. You can certainly try the earlier versions to see if that gets you up and running.

Which method did you use to backup your firmware? Could you send a copy and I'll see why the payload isn't working on V03 for you.

[LeMaitre4523]

I actually tried the V02, this one worked well, there is still a problem of connection to the wifi, and I used the commands of your backup script with telnet, so I have mtd block files I know more what

[cjj25]

If you put them into a folder, zip them up and upload them to https://wetransfer.com/ (as a link, not email) and attach the link here.

[LeMaitre4523]

Okay, you need all of them? I noticed that there was such a thing as userdata

[cjj25]

Ideally I need mtdblock0 which contains everything, I'll remove the link once it has been submitted.

Just so you're aware, it'll contain your WiFi password and api keys for Yi (being fully transparent here).

[LeMaitre4523]

Yeah it doesn’t matter, I’m sending you this tonight

[LeMaitre4523]

This is for you!

REMOVED

[cjj25]

Can you confirm if this is a Tuya based camera or a Yi? What app are you using in the mobile?

[LeMaitre4523]

According to my research it’s a Yi sub-brand, it’s called Keyke and I use the Yi IoT App

[cjj25]

Apologies, I was looking at the wrong firmware dump!

What's functional then? I see you've got Telnet and possibly Wifi? Do you have access to the RTSP?

[LeMaitre4523]

I do have access to telnet, and there is wifi, but I have nothing for rtsp

[cjj25]

Could you provide me with a copy of the output for the following:

ps df cat /proc/mtd