cilynx
Issue with TP Link AC1300 T3U(EU) ver. 1 on Ubuntu 18.04
Hello,
I have successfully compiled and installed the driver (I have tried earlier with 8822bu drivers by jeremy31 with no success, unistalled them).
The internet connection worked for the day and after a reboot I cannot make it work again. On the other hand, the command
lsusb returns for Bus 001 Device 002: ID 2357:012d with no further description. The description was absent even when the connection worked fine earlier today.
The adapter sees the wireless networks but when I try to connect it never happens. I tried recompiling with older versions of the driver but the situation was the same.
My kernel vesion is 5.3.0-28-generic.
Any ideas how I could make it work?
EDIT: I scrolled through the issues from older releases and found many issues like this one. Turns out the dongle works after plugging it in the USB 3.0 port in the rear panel. Doesn't work with any other port. Very strange!
Hello, I have the same problem like @robpal1990 , only it works fine with kernel 5.0.0-48 but not with any 5.3 kernel. I don't have a usb3 port to test. I haven't found a solution yet.
Same here, this driver works great with TP-Link Archer AC1300 T4U ver 3 on Ubuntu 20.04 (kernel 5.4.0-33 generic)
Just for the record and unlike what's mentioned above, the driver works very badly for me with TP-LINK Archer T4U v3 on Ubuntu 20.04 (kernel 5.4.0-107-generic). Issue reported at https://github.com/cilynx/rtl88x2bu/issues/203
