champ
champ copied to clipboard
Robot legs move in opposite directions than what's showing on rviz using joints gui
Hi,
I've been stuck on trying to figure out why the legs on the left side of my robot move in opposite directions than what's showing on rviz when using the joint gui. I followed the hardwar_integration guide and mounted the servos at their zero positions with the robot's legs pointing straight down. Additionally, the shoulder/hip actuator can only move in one direction, as it is already at the limit of it motion range according to the directions in the hardware_integration guide. Is this intended?
Thanks!
On of the Simple check we did is, whether all the axis defined in the leg joints follow the required champ configuration which is as shown in figure . Hope it will help to resolve the issue