vm-bhyve
vm-bhyve copied to clipboard
Shell based, minimal dependency bhyve manager
vm-bhyve
Management system for FreeBSD bhyve virtual machines
Some of the main features include:
- Windows/UEFI support
- Simple commands to create/start/stop bhyve instances
- Simple configuration file format
- Virtual switches supporting vlans & automatic device creation
- ZFS support
- FreeBSD/MidnightBSD/NetBSD/OpenBSD/Linux guest support
- Automatic assignment of console devices to access guest console
- Integration with rc.d startup/shutdown
- Guest reboot handling
- Designed with multiple compute nodes + shared storage in mind (NFS/iSCSI/etc)
- Multiple datastores
- VNC graphics & tmux support (1.1+ only. See wiki for instructions)
- Dependency free**
** Some additional packages may be required in certain circumstances -
- The port has a dependancy on ca_root_nss added by the ports maintainers to help avoid any SSL errors when downloading FreeBSD ISO files using the
vm iso
command. -
sysutils/grub2-bhyve
is required to run Linux or any other guests that need a Grub bootloader. -
sysutils/bhyve-firmware
is required to run UEFI guests -
sysutils/tmux
is needed to use tmux console access instead of cu/nmdm
See the GitHub wiki for more information and examples.
For most users, I recommend using the version in ports (1.1+). Main development happens in the master branch on GitHub and it may contain broken or incomplete features.
Quick-Start
A simple overview of the commands needed to install vm-bhyve and start a freebsd guest. See the sections below for more in-depth details.
1. pkg install vm-bhyve
2. zfs create pool/vm
3. sysrc vm_enable="YES"
4. sysrc vm_dir="zfs:pool/vm"
5. vm init
6. cp /usr/local/share/examples/vm-bhyve/* /mountpoint/for/pool/vm/.templates/
7. vm switch create public
8. vm switch add public em0
9. vm iso https://download.freebsd.org/ftp/releases/ISO-IMAGES/11.2/FreeBSD-11.2-RELEASE-amd64-bootonly.iso
10. vm create myguest
11. vm install [-f] myguest FreeBSD-11.2-RELEASE-amd64-bootonly.iso
12. vm console myguest
-
[ ] Line 1 Install vm-bhvye
-
[ ] Line 2 Create a dataset for your virtual machines. If you're not using ZFS, just create a normal directory.
-
[ ] Lines 3-4 Enable vm-bhyve in /etc/rc.conf and set the dataset to use. If not using ZFS, just set
$vm_dir="/my/vm/folder"
. -
[ ] Line 5 Run the
vm init
command to create the required directories under $vm_dir and load kernel modules. -
[ ] Line 6 Install the sample templates that come with vm-bhyve.
-
[ ] Lines 7-8 Create a virtual switch called 'public' and attach your network interface to it. Replace
em0
with whatever interface connects your machine to the network. -
[ ] Line 9 Download a copy of FreeBSD from the ftp site.
-
[ ] Lines 10-12 Create a new guest using the
default.conf
template, run the installer and then connect to its console. At this point proceed through the installation as normal. By specifying the-f
option before the install command, the guest will run directly on your terminal so theconsole
command is not required. (Bear in mind that you won't get back to your terminal until the guest is fully shutdown)
Install
Download the latest release from GitHub, or install sysutils/vm-bhyve
To install, just run the following command inside the vm-bhyve source directory
# make install
If you want to run guests other than FreeBSD, you will need the grub2-bhyve package;
# pkg install grub2-bhyve
Initial configuration
First of all, you will need a directory to store all your virtual machines and vm-bhyve configuration. If you are not using ZFS, just create a normal directory:
# mkdir /somefolder/vm
If you are using ZFS, create a dataset to hold vm-bhyve data
# zfs create pool/vm
Now update /etc/rc.conf to enable vm-bhyve, and tell it where your directory is
vm_enable="YES"
vm_dir="/somefolder/vm"
Or with ZFS:
vm_enable="YES"
vm_dir="zfs:pool/vm"
This directory will be referred to as $vm_dir in the rest of this readme.
Now run the following command to create the directories used to store vm-bhvye configuration and load any necessary kernel modules. This needs to be run once after each host reboot, which is normally handled by the rc.d script
# vm init
Virtual machine templates
When creating a virtual machine, you use a template which defines how much memory to give the guest, how many cpu cores, and networking/disk configuration. The templates are all stored inside $vm_dir/.templates. To install the sample templates, run the following command:
# cp /usr/local/share/examples/vm-bhyve/* /my/vm/path/.templates/
If you look inside the template files with a text editor, you will see they are very simple. You can create as many templates as you like. For example you could have web-server.conf, containing the setting for your web servers, or freebsd-large.conf for large FreeBSD guests, and so on. This is the contents of the default template:
guest="freebsd"
loader="bhyveload"
cpu=1
memory=256M
disk0_type="virtio-blk"
disk0_name="disk0.img"
network0_type="virtio-net"
network0_switch="public"
You will notice that each template is set to create one network interface. You can easily add more network interfaces by duplicating the two network configuration options and incrementing the number. In general you will not want to change the type from 'virtio-net', but you will notice the first interface is set to connect to a switch called 'public'. See the next section for details on how to configure virtual switches.
I recommend reading the man page or sample-templates/config.sample
for a full list of supported template
options and a description of their purpose. Almost all bhyve functionality is supported and a large variety
of network/storage configurations can be achieved.
Virtual Switches
When a guest is started, each network interface is automatically connected to the virtual switch specified in the configuration file. By default all the sample templates connect to a switch called 'public', although you can use any name. The following section shows how to create a switch called 'public', and configure various settings:
# vm switch create public
If you just want to bridge guests to your physical network, add the appropriate real interface to the switch. Obviously you will need to replace em0 here with the correct interface name on your system:
# vm switch add public em0
If you want guest traffic to be on a specific VLAN when leaving the host, specify a vlan number. To turn off vlans, just set the vlan number to 0:
# vm switch vlan public 10
# vm switch vlan public 0
You can view current switch configuration using the list command:
# vm switch list
Creating virtual machines
Use one of the following command to create a new virtual machine:
# vm create testvm
# vm create -t templatename -s 50G testvm
The first example uses the default.conf template, and will create a 20GB disk image. The second example specifies the templatename.conf template, and tells vm-bhyve to create a 50GB disk.
You will need an ISO to install the guest with, so download one using the iso command:
# vm iso https://download.freebsd.org/ftp/releases/ISO-IMAGES/11.2/FreeBSD-11.2-RELEASE-amd64-disc1.iso
To start a guest install, run the following command. vm-bhyve will run the machine in the background, so use the console command to connect to it and finish installation.
# vm install testvm FreeBSD-11.2-RELEASE-amd64-disc1.iso
# vm console testvm
You can also specify the foreground option to run the guest directly on your terminal:
# vm install -f testvm FreeBSD-11.2-RELEASE-amd64-disc1.iso
Once installation has finished, you can reboot the guest from inside the console and it will boot up into the new OS (assuming installation was successful). Further reboots will work as expected and the guest can be shutdown in the normal way. As the console uses the cu command, type ~+Ctrl-D to exit back to your host.
The following commands start and stop virtual machines:
# vm start testvm
# vm stop testvm
The basic configuration of each machine and state can be viewed using the list command:
# vm list
NAME GUEST LOADER CPU MEMORY AUTOSTART STATE
alpine linux default 1 512M No Stopped
c7 linux default 1 512M Yes [2] Stopped
centos linux default 1 512M No Stopped
debian linux default 1 512M No Stopped
fbsd freebsd default 1 256M No Stopped
netbsd generic grub 1 256M No Stopped
openbsd generic grub 1 256M No Stopped
pf freebsd default 1 256M Yes [1] Stopped
ubuntu linux default 1 512M No Stopped
wintest windows default 2 2G No Running (2796)
All running machines can be stopped using the stopall command
# vm stopall
On host boot, vm-bhyve will use the 'vm startall' command to start all machines. You can control which guests start automatically using the following variables in /etc/rc.conf:
vm_list="vm1 vm2"
vm_delay="5"
The first defines the list of machines to start on boot, and the order to start them. The second is the number of seconds to wait between starting each one. 5 seconds is the recommended setting, although a longer delay is useful if you have disk intensive guests and don't want them all booting at the same time.
There's also a command which opens a guest's configuration file in your default text editor, allowing you to easily make changes to the configuration. Please note that changes only take effect after a full shutdown and restart of the guest
# vm configure testvm
See the man page for a full description of all available commands.
# man vm
Using cloud images
You can use cloud images to create virtual machines. The vm img
command will download the image to datastore and
uncompress it if needed (.xz, .tar.gz, and .gz files are supported). The image should be in RAW or QCOW2 format.
To use this feature you'll need install qemu-utils package:
# pkg install qemu-utils
To launch FreeBSD using official cloud image:
# vm img https://download.freebsd.org/ftp/releases/VM-IMAGES/11.2-RELEASE/amd64/Latest/FreeBSD-11.2-RELEASE-amd64.raw.xz
# vm create -t freebsd-zvol -i FreeBSD-11.2-RELEASE-amd64.raw freebsd-cloud
# vm start freebsd-cloud
To list downloaded images:
# vm img
DATASTORE FILENAME
default CentOS-7-x86_64-GenericCloud-20180930_02.raw
default debian-9-openstack-amd64.qcow2
default Fedora-AtomicHost-28-1.1.x86_64.raw
default FreeBSD-11.2-RELEASE-amd64.raw
default xenial-server-cloudimg-amd64-uefi1.img
Using cloud init
vm-bhyve has basic support for providing cloud-init configuration to the guest. You can enable it with -C
option
to vm create
command. You can also pass public SSH key to be injected into the guest with option -k <file>
.
Example:
# vm create -t linux -i xenial-server-cloudimg-amd64-uefi1.img -C -k ~/.ssh/id_rsa.pub cloud-init-ubuntu
# vm start cloud-init-ubuntu
Starting cloud-init-ubuntu
* found guest in /zroot/vm/cloud-init-ubuntu
* booting...
# ssh [email protected]
The authenticity of host '192.168.0.91 (192.168.0.91)' can't be established.
ECDSA key fingerprint is SHA256:6s9uReyhsIXRv0dVRcBCKMHtY0kDYRV7zbM7ot6u604.
No matching host key fingerprint found in DNS.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.0.91' (ECDSA) to the list of known hosts.
Welcome to Ubuntu 16.04.5 LTS (GNU/Linux 4.4.0-141-generic x86_64)
Adding custom disks
Scenario: If you have a vm on one zpool and would like to add a new virtual disk to it that resides on a different zpool.
Manually create a sparse-zvol (in this case 50G in size).
# zfs create -sV 50G -o volmode=dev "zpool2/vm/yourvm/disk1"
Add it to your vm config file.
Please note, for Windows guests the type will need to be ahci-hd
, as it does not have virtio-blk drivers.
# vm configure yourvm
disk1_name="/dev/zvol/zpool2/vm/yourvm/disk1"
disk1_type="virtio-blk"
disk1_dev="custom"
Restart your vm.
Windows Support
Please see the Windows section in the Wiki
Autocomplete
If you are using the default csh/tcsh shell built into FreeBSD, running the following command should allow autocomplete to work for all the currently supported functions. This is especially useful for viewing and completing guest & ISO file names. Please note that there's three occurrences of '/path/to/vm' which need to be changed to the directory containing your virtual machines.
To make the autocomplete features available permanently, add the following to your $HOME/.cshrc
file. Then either
logout/login, or run source ~/.cshrc
to cause the .cshrc
file to be reloaded.
complete vm \
'p@1@(list create install start stop console configure reset poweroff destroy clone snapshot rollback add switch iso)@' \
'n@create@n@' \
'n@list@n@' \
'n@iso@n@' \
'n@switch@(list create add remove destroy vlan nat)@' \
'N@switch@`sysrc -inqf /path/to/vm/.config/switch switch_list`@' \
'N@install@`ls -1 /path/to/vm/.iso`@' \
'N@nat@(off on)@' \
'p@2@`ls -1 /path/to/vm | grep -v "^\." | grep -v "^images"`@'