chros73
chros73
If ps-ch won't work for whatever reason then try ps, its building system slightly different.
@pyroscope coupled couple of libraries into it, that's why I think it can behave better. The biggest problem for you can be to figure out what packages it needs to...
Hi! Take a look at this [comment](https://github.com/mpc-hc/mpc-hc/pull/196#issuecomment-359254041) ...
Hi @nparkanyi ! First of all, thank you for your hard work! Maybe you also know that - unfortunately - this project development became dead. The good news is that...
Written by ituser694: > I have found a work around that seems to help until the issue can be resolved, and that is to recompile from source after you edit...
And a [3rd solution](https://github.com/chros73/rtorrent-ps-ch_setup/wiki/Queue-Manager), using pyrocore utils a bit, in a specific setup.
You can do this easily by specifying a different watch directory for these torrents and use `load.normal` with them instead of `load.start`, e.g. as [here](load.normal). (But probably it can be...
> I can see it reading that much with hashing enabled but you have it off. `check_hash` is on by default (e.g. when you don't use a config file). Although...
> downloading a SINGLE torrent with ZERO UPLOAD. I've just tried it, just in case (with the above linked config): downloading only 1 with zero upload. ``` [Rate 4.5/4067.1 KB]...
I made one more test: - switch off pieces preloading (during runtime): `pieces.preload.type.set = 0` - all other settings are the same as was before (network buffer size is still...