Christopher Co

Please add the following `Name (_HRV, 0x1)` to your board's Dsdt-Usb table. This will advertise the TT block to Windows and allow for low-speed device enumeration. https://github.com/ms-iot/imx-edk2-platforms/commit/836a212a811f78549f5399cae433255e8ebad86c

From the output, looks like the eMMC was not provisioned while in WinPE. After a successful flash, your EFI shell should see multiple block partitions like this:  To debug...

Overall, this can be a bit confusing. I'll try my best to explain. The SD card gets loaded with a WinPE image. WinPE is a very lightweight Windows image and...

The boot log appears to indicate you are indeed booting into Windows on both of the boots. ``` KDTARGET: Refreshing KD connection ``` is the message printed from within Windows...

Buddy Build - https://dev.azure.com/mariner-org/mariner/_build/results?buildId=535254&view=results

FYI - We have updated the image sizes in our latest CBL-Mariner 2.0 Marketplace images to be 5GB. Thank you @aditjha-msft for making these changes! @johanburati Please try them out...

Now that the Marketplace images disk sizes are increased, closing out issue. Please feel free to reopen if there is anything on this topic that we can help address.

Mariner 1.0 is EOL. Closing this issue out as part of resolving out stale issues. Please open a new issue against 2.0 if this still a problem

Tagging @PawelWMS & @sameluch

Merged as part of https://github.com/microsoft/CBL-Mariner/pull/4369 . Closing this one