[BUG]手机端调整温度的时候，填入的数字超过1.0就无法保存，只能拖动When adjusting the temperature on the mobile device, if the entered number exceeds 1.0, it cannot be saved, and you can only use the drag function.

[DeepJH]

Bug 描述 手机端调整温度的时候，填入的数字超过1.0就无法保存，只能拖动

重现步骤 请提供能够让我们重现这个 bug 的步骤：

1. 在模型设置里输入数字修改temperature大于1.0
2. 保存
3. 再次打开，发现没保存

期望结果 希望输入数字能正常识别，能够正常保存

实际结果 输入数字不能正常识别，不能够正常保存

Bug Description When adjusting the temperature on the mobile device, if the entered number exceeds 1.0, it cannot be saved, and only dragging is available.

Reproduction Steps Please provide the steps that allow us to reproduce this bug:

1. Enter a number in the model settings to modify the temperature to be greater than 1.0.
2. Save it.
3. Open it again and find that it has not been saved.

Expected Result It is expected that the entered number can be recognized normally and saved properly.

Actual Result The entered number cannot be recognized normally and cannot be saved properly.