network::cisco::wlc::snmp::plugin HA check

[kadrika]

Hi,

Can you please add HA check to Cisco controller plugin? Thanks!

If you need snmpwalk or tests to be made, let me know.

[kadrika]

Any update?

[garnier-quentin]

Could you give me snmpwalk result about the good OIDs ?

[kadrika]

Hi,

The correct MIB seems to be CISCO-RF-MIB. OID is 1.3.6.1.4.1.9.9.176. I will send the snmpwalk to your email.

[kadrika]

Hi again,

I tested today and it seems that it would be enough if you can add 2 modes: PeerUnitState 1.3.6.1.4.1.9.9.176.1.1.4.0 and StatusPrimaryMode 1.3.6.1.4.1.9.9.176.1.1.5.

First one has these values:notKnown(1), disabled(2), initialization(3), negotiation(4), standbyCold(5), standbyColdConfig(6), standbyColdFileSys(7), standbyColdBulk(8), standbyHot(9), activeFast(10), activeDrain(11), activePreconfig(12), activePostconfig(13), active(14), activeExtraload(15), activeHandback(16). Mode is ok if the status is 9.

Second one has value: true(1), false(2). Mode is ok, if the status is 1.

[lucie-dubrunfaut]

Hello :)

This issue seems particularly old so let me close it. If the enhancement request is still current, please address it here to be take into account and vote on. Thank you for your understanding.