ddt4all
ddt4all copied to clipboard
cedricp
Can't connect to ELM327 in BT with ddt4all
Hi everyone!
I have a problem with my ELM327 (PIC18F25K80 Chip). So I try to use ddt4all I can connect to the OBD2 in Bluetooth from my laptop. (Win7 x64) I tried with the firewall and anti-virus disabled but it didn't help. When I click on "Tests ELM" , I get this message:
v1.0 ATZ [OK] v1.0 ATWS [OK] v1.0 ATE1 [OK] v1.0 ATL1 [OK] v1.0 ATL0 [OK] v1.0 ATI [OK] v1.0 AT@1 [OK] v1.0 ATRV [OK] v1.3 ATS1 [OK] v1.3 ATS0 [OK] v1.0 ATCAF0 [OK] v1.0 ATCFC0 [OK] v1.0 ATH0 [OK] v1.0 ATR1 [OK] v1.2 ATKW0 [OK] v1.3 ATD1 [OK] v1.3 ATD0 [OK] v1.0 ATAL [OK] V1.0 ATSP 3 [OK] V1.0 ATSP 4 [OK] v1.2 ATIIA 01 [OK] v1.4 ATSI [OK] V1.0 ATSP 5 [OK] v1.4 ATFI [SIKERTELEN] //NOK V1.0 ATSP 6 [OK] V1.0 ATSP 7 [OK] V1.0 ATSP 8 [OK] v1.0 ATPC [OK] v1.0 ATSH 012 [OK] v1.0 ATSW 96 [OK] v1.0 ATSW 34 [OK] v1.0 ATWM 817AF13E [OK] v1.0 ATIB 10 [OK] v1.0 ATST FF [OK] v1.3 ATCRA 012 [OK] v1.3 ATCRA 01234567 [OK] v1.1 ATFC SH 012 [OK] v1.1 ATFC SH 00112233 [OK] v1.1 ATFC SD 300000 [OK] v1.1 ATFC SM 1 [OK] v1.2 ATAT0 [OK] v1.2 ATAT1 [OK] v1.0 ATCM 123 [OK] v1.0 ATCM 12345678 [OK] v1.0 ATCF 123 [OK] v1.0 ATCF 12345678 [OK] Tracback (most recent call last) File ".\ddt4all.py", line 1201, in check_elm res = elm.elm_checker(port, speed, self.logview, coreQcoreApplication) File "C:\Program Files (x86)\ddt4all\elm.py", line 1328, in elm_cheker res = elm.send_raw(cm[2]) File "C:\Program Files (x86)\ddt4all\elm.py", line 1063, in send_raw self.lf.write("<[" + str(round(tc - tb, 3)) + "]" + self.buff + "\n") UnicodeEncodeError: 'ascii' codec can't encode character u'\u0150' in position 33: ordinal not in range(128)
Maybe my OBD2 is not compatible? Any other idea?
Thanks!
try uninstalling your version of DDT4ALL and then downloading this version from here and choose "ALL CARS EXE" and install it see if that works: https://www.drive2.com/b/498093336985338243/
try uninstalling your version of DDT4ALL and then downloading this version from here and choose "ALL CARS EXE" and install it see if that works: https://www.drive2.com/b/498093336985338243/
I've tried, same problem
show the file elm_ddt
[08:26:40.415]ATZ <[0.125]ATZ
ELM327 v1.5
[08:26:40.540] ATZ
<[0.125] ATZ
ELM327 v1.5
[08:26:40.696] ATWS
<[0.016] ATWS
ELM327 v1.5
[08:26:40.727] ATE1
<[0.0] ATE1
OK
[08:26:40.727] ATL1
<[0.0] ATL1
OK
[08:26:40.743] ATL0
<[0.031] ATL0
OK
[08:26:40.774] ATI
<[0.016] ATI
ELM327 v1.5
[08:26:40.790] AT@1
<[0.031] AT@1
OBDII to RS232 Interpreter
[08:26:40.821] ATRV
<[0.015] ATRV
12.2V
[08:26:40.852] ATS1
<[0.0] ATS1
OK
[08:26:40.868] ATS0
<[0.031] ATS0
OK
[08:26:40.899] ATCAF0
<[0.015] ATCAF0
OK
[08:26:40.914] ATCFC0
<[0.032] ATCFC0
OK
[08:26:40.946] ATH0
<[0.015] ATH0
OK
[08:26:40.977] ATR1
<[0.0] ATR1
OK
[08:26:40.977] ATKW0
<[0.015] ATKW0
1:-- 2:--> [08:26:41.008] ATD1
<[0.031] ATD1
OK
[08:26:41.055] ATD0
<[0.015] ATD0
OK
[08:26:41.070] ATAL
<[0.032] ATAL
OK
[08:26:41.102] ATSP 3
<[0.015] ATSP 3
OK
[08:26:41.133] ATZ
<[0.109] ATZ
ELM327 v1.5
[08:26:41.242] ATSP 4
<[0.0] ATSP 4
OK
[08:26:41.258] ATIIA 01
<[0.015] ATIIA 01
OK
[08:26:41.273] ATSI
<[0.016] ATSI
OK
[08:26:41.304] ATZ
<[0.11] ATZ
ELM327 v1.5
[08:26:41.414] ATSP 5
<[0.015] ATSP 5
OK
[08:26:41.429] ATFI
<[0.016] ATFI
?
[08:26:41.445] ATZ
<[0.125] ATZ
ELM327 v1.5
[08:26:41.570] ATSP 6
<[0.0] ATSP 6
OK
[08:26:41.585] ATSP 7
<[0.0] ATSP 7
OK
[08:26:41.601] ATSP 8
<[0.015] ATSP 8
OK
[08:26:41.616] ATPC
<[0.032] ATPC
OK
[08:26:41.648] ATSH 012
<[0.015] ATSH 012
OK
[08:26:41.663] ATSW 96
<[0.031] ATSW 96
OK
[08:26:41.694] ATSW 34
<[0.016] ATSW 34
OK
[08:26:41.726] ATWM 817AF13E
<[0.015] ATWM 817AF13E
OK
[08:26:41.741] ATIB 10
<[0.047] ATIB 10
KBusBaud=10400 OK
[08:26:41.804] ATST FF
<[0.015] ATST FF
OK
[08:26:41.819] ATCRA 012
<[0.016] ATCRA 012
OK
[08:26:41.850] ATCRA 01234567
<[0.016] ATCRA 01234567
OK
[08:26:41.866] ATFC SH 012
<[0.031] ATFC SH 012
OK
[08:26:41.897] ATFC SH 00112233
<[0.016] ATFC SH 00112233
OK
[08:26:41.928] ATFC SD 300000
<[0.016] ATFC SD 300000
OK
[08:26:41.944] ATFC SM 1
<[0.047] ATFC SM 1
OK
[08:26:41.991]ATAT0
<[0.031]ATAT0
OK
[08:26:42.022]ATAT1
<[0.016]ATAT1
OK
[08:26:42.053] ATCM 123
<[0.016] ATCM 123
OK
[08:26:42.069] ATCM 12345678
<[0.031] ATCM 12345678
OK
[08:26:42.100] ATCF 123
<[0.016] ATCF 123
OK
[08:26:42.116] ATCF 12345678
<[0.031] ATCF 12345678
OK
[08:26:42.147] ATZ
<[0.14] ATZ
ELM327 v1.5
[08:26:42.287] ATMA
[08:27:23.951]ATZ <[0.124]ATZ
ELM327 v1.5
############################################################ #[01/11/22 08:27:39.848] Init CAN ############################################################
[08:27:39.848]AT WS <[0.031]AT WS
ELM327 v1.5
[08:27:39.879]AT E1 <[0.0]AT E1 OK
[08:27:39.879]AT S0 <[0.016]AT S0 OK
[08:27:39.895]AT H0 <[0.0]AT H0 OK
[08:27:39.895]AT L0 <[0.016]AT L0 OK
[08:27:39.911]AT AL <[0.0]AT AL OK
[08:27:39.911]AT CAF0 <[0.0]AT CAF0 OK
############################################################ #connect to: BCM95_SW9_V9_2 Addr:26 ############################################################
[08:27:39.911]AT SH 745 <[0.015]AT SH 745 OK
[08:27:39.926]AT CRA 765 <[0.016]AT CRA 765 OK
[08:27:39.942]AT FC SH 745 <[0.031]AT FC SH 745 OK
[08:27:39.973]AT FC SD 30 00 00 <[0.0]AT FC SD 30 00 00 OK
[08:27:39.973]AT FC SM 1 <[0.016]AT FC SM 1 OK
[08:27:39.989]AT SP 6 <[0.0]AT SP 6 OK
[08:27:39.989]0210C0 ############################################################ #[01/11/22 08:27:47.024] Init CAN ############################################################ [08:27:47.024]AT WS <[0.0]AT WS
ELM327 v1.5
[08:27:47.024]AT E1 <[0.016]AT E1 OK
[08:27:47.040]AT S0 <[0.0]AT S0 OK
[08:27:47.040]AT H0 <[0.015]AT H0 OK
[08:27:47.055]AT L0 <[0.0]AT L0 OK
[08:27:47.055]AT AL <[0.0]AT AL OK
[08:27:47.055]AT CAF0 <[0.016]AT CAF0 OK
############################################################ #connect to: BCM95_SW9_V9_2 Addr:26 ############################################################
[08:27:47.071]AT SH 745 <[0.0]AT SH 745 OK
[08:27:47.071]AT CRA 765 <[0.016]AT CRA 765 OK
[08:27:47.087]AT FC SH 745 <[0.015]AT FC SH 745 OK
[08:27:47.102]AT FC SD 30 00 00 <[0.0]AT FC SD 30 00 00 OK
[08:27:47.102]AT FC SM 1 <[0.016]AT FC SM 1 OK
[08:27:47.118]AT SP 6 <[0.0]AT SP 6 OK
[08:27:47.118]0210C0 ############################################################ #[01/11/22 08:27:53.061] Init CAN ############################################################ [08:27:53.061]AT WS <[0.016]AT WS
ELM327 v1.5
[08:27:53.077]AT E1 <[0.016]AT E1 OK
[08:27:53.093]AT S0 <[0.0]AT S0 OK
[08:27:53.093]AT H0 <[0.0]AT H0 OK
[08:27:53.093]AT L0 <[0.015]AT L0 OK
[08:27:53.108]AT AL <[0.0]AT AL OK
[08:27:53.108]AT CAF0 <[0.0]AT CAF0 OK
############################################################ #connect to: BCM95_SW16_V16_1 Addr:26 ############################################################
[08:27:53.108]AT SH 745 <[0.016]AT SH 745 OK
[08:27:53.124]AT CRA 765 <[0.0]AT CRA 765 OK
[08:27:53.124]AT FC SH 745 <[0.047]AT FC SH 745 OK
[08:27:53.171]AT FC SD 30 00 00 <[0.0]AT FC SD 30 00 00 OK
[08:27:53.171]AT FC SM 1 <[0.015]AT FC SM 1 OK
[08:27:53.186]AT SP 6 <[0.0]AT SP 6 OK
[08:27:53.186]0210C0 ############################################################ #[01/11/22 08:27:59.130] Init CAN ############################################################ [08:27:59.130]AT WS <[0.015]AT WS
ELM327 v1.5
[08:27:59.145]AT E1 <[0.0]AT E1 OK
[08:27:59.145]AT S0 <[0.032]AT S0 OK
[08:27:59.177]AT H0 <[0.0]AT H0 OK
[08:27:59.177]AT L0 <[0.015]AT L0 OK
[08:27:59.192]AT AL <[0.0]AT AL OK
[08:27:59.192]AT CAF0 <[0.0]AT CAF0 OK
############################################################ #connect to: BCM95_SW16_V16_1 Addr:26 ############################################################
[08:27:59.192]AT SH 745 <[0.016]AT SH 745 OK
[08:27:59.208]AT CRA 765 <[0.0]AT CRA 765 OK
[08:27:59.208]AT FC SH 745 <[0.015]AT FC SH 745 OK
[08:27:59.223]AT FC SD 30 00 00 <[0.016]AT FC SD 30 00 00 OK
[08:27:59.239]AT FC SM 1 <[0.0]AT FC SM 1 OK
[08:27:59.239]AT SP 6 <[0.0]AT SP 6 OK
[08:27:59.239]0210C0
Remove the log file and do an Elm test with the software from the link. show the new log data I want to see test result from atpps.
Remove the log file and do an Elm test with the software from the link. show the new log data I want to see test result from atpps.
The test results:
[10:36:50.980]ATZ <[0.11]ATZ
ELM327 v1.5
[10:36:51.090] ATZ
<[0.093] ATZ
ELM327 v1.5
[10:36:51.277] ATWS
<[0.062] ATWS
ELM327 v1.5
[10:36:51.339] ATE1
<[0.016] ATE1
OK
[10:36:51.355] ATL1
<[0.031] ATL1
OK
[10:36:51.386] ATL0
<[0.016] ATL0
OK
[10:36:51.417] ATI
<[0.047] ATI
ELM327 v1.5
[10:36:51.464] AT@1
<[0.0] AT@1
OBDII to RS232 Interpreter
[10:36:51.526] ATRV
<[0.016] ATRV
12.3V
[10:36:51.542] ATS1
<[0.016] ATS1
OK
[10:36:51.558] ATS0
<[0.031] ATS0
OK
[10:36:51.589] ATCAF0
<[0.015] ATCAF0
OK
[10:36:51.620] ATCFC0
<[0.016] ATCFC0
OK
[10:36:51.636] ATH0
<[0.031] ATH0
OK
[10:36:51.667] ATR1
<[0.015] ATR1
OK
[10:36:51.682] ATKW0
<[0.047] ATKW0
1:-- 2:--> [10:36:51.729] ATD1
<[0.031] ATD1
OK
[10:36:51.760] ATD0
<[0.032] ATD0
OK
[10:36:51.792] ATAL
<[0.015] ATAL
OK
[10:36:51.807] ATSP 3
<[0.031] ATSP 3
OK
[10:36:51.838] ATZ
<[0.125] ATZ
ELM327 v1.5
[10:36:51.963] ATSP 4
<[0.0] ATSP 4
OK
[10:36:51.963] ATIIA 01
<[0.016] ATIIA 01
OK
[10:36:51.994] ATSI
<[0.016] ATSI
OK
[10:36:52.026] ATZ
<[0.109] ATZ
ELM327 v1.5
[10:36:52.135] ATSP 5
<[0.0] ATSP 5
OK
[10:36:52.135] ATFI
<[0.031] ATFI
?
[10:36:52.166] ATZ
<[0.125] ATZ
ELM327 v1.5
[10:36:52.291] ATSP 6
<[0.0] ATSP 6
OK
[10:36:52.291] ATSP 7
<[0.015] ATSP 7
OK
[10:36:52.306] ATSP 8
<[0.032] ATSP 8
OK
[10:36:52.338] ATPC
<[0.015] ATPC
OK
[10:36:52.369] ATSH 012
<[0.015] ATSH 012
OK
[10:36:52.384] ATSW 96
<[0.032] ATSW 96
OK
[10:36:52.416] ATSW 34
<[0.015] ATSW 34
OK
[10:36:52.447] ATWM 817AF13E
<[0.0] ATWM 817AF13E
OK
[10:36:52.462] ATIB 10
<[0.032] ATIB 10
KBusBaud=10400 OK
[10:36:52.494] ATST FF
<[0.031] ATST FF
OK
[10:36:52.540] ATCRA 012
<[0.016] ATCRA 012
OK
[10:36:52.556] ATCRA 01234567
<[0.031] ATCRA 01234567
OK
[10:36:52.587] ATFC SH 012
<[0.016] ATFC SH 012
OK
[10:36:52.618] ATFC SH 00112233
<[0.016] ATFC SH 00112233
OK
[10:36:52.634] ATFC SD 300000
<[0.031] ATFC SD 300000
OK
[10:36:52.665] ATFC SM 1
<[0.016] ATFC SM 1
OK
[10:36:52.681]ATAT0
<[0.0]ATAT0
OK
[10:36:52.696]ATAT1
<[0.032]ATAT1
OK
[10:36:52.743] ATCM 123
<[0.0] ATCM 123
OK
[10:36:52.743] ATCM 12345678
<[0.016] ATCM 12345678
OK
[10:36:52.759] ATCF 123
<[0.031] ATCF 123
OK
[10:36:52.806] ATCF 12345678
<[0.031] ATCF 12345678
OK
[10:36:52.837] ATZ
<[0.125] ATZ
ELM327 v1.5
[10:36:52.962] ATMA
