ddt4all
ddt4all copied to clipboard
cedricp
DDT4ALL not detecting Stereo ECU
I had an aftermarket stereo/radio on my megane 3 which i've now replaced with the original one from breakers yard. However when I do automatic scan with ddt4all it doesn't detect any audio ECU. However, Renault CAN CLIP can see it and I can read the parameters from Renault CAN CLIP. But DDT4ALL can't find it. Here is a screenshot of the ECU's DDT4ALL is only finding: https://i.imgur.com/R55n68l.png
And here is a screenshot of Renault CAN CLIP showing the Radio ECU: https://i.imgur.com/8P6jtkf.png
Can anyone help please. If I manually select it, will it work? which one do I manually select?
You must to connect with 12 and 13 instead of 6 and 14. https://www.drive2.ru/l/468057702971474426/ CAN CLIP automatically switches to 12 and 13.
Thank you, I remapped the ELM to pins 12 and 13 and now it can detect Audio but my Audio ECU database cannot be found. I get the following error message: https://i.imgur.com/2vVE6X3.png
Thank you. I will try that. What is the MIU ECU that it also found on the multimedia network? I think this is the clock/temperature display unit.
Hi, I have the same issue with my Renault Capture 2019, the firmware of the Ecu Audio is new ,that the DDT4ALL supported. https://imgur.com/a/qJve06J I don't know what to choose for the list , if i choose Capture ph2 i get Navigation MFD v4.3. One more question, can I modify the speed warning for the seat belt ? I use a modified ELM for low/high CAN.
I have the same issue with my Renault Capture 2019, the firmware of the Ecu Audio is new ,that the DDT4ALL supported. https://imgur.com/a/qJve06J I don't know what to choose for the list , if i choose Capture ph2 i get Navigation MFD v4.3.
Your VIN says Captur X87 with Radio Medianav RA43D. ddt4all have found ULC4. everything OK
HI KarelSvo , Thank you for your replay. After making the changes with DDT4ALL, do I need to restart the audio system? Can you explain how? I changed the color from Renault to Dacia, and the default language. I did a factory reset of the audio system, but the changes do not become visible. Can I start the engine programable , if i enable RES from ECU(audio) , and from T4_HFM_DDT2000_SW14.45/REMOTE ENGINE STRAT/ Configuration ? My remote don't have a start engine button , he has a light button.
Thank you.
Hi, guys. Have trying to replace a R108 original radio from my megane 3 van (also with a tomtom GPs device no live sersion) with a R208 radio from scrap yard (but that came from a car with no GPS, it has a standard LCD). With R208 radio fitted on the car I can change radio parameters, but I can not access to the navigation ECU, so i can change its settings from a R108 radio to a R208 radio (the icon on the left of Clip is greyed / no selection is possible). The strange thing is that with R108 fitted on the car, the same icon it not greyed, it can be selected but no navigation parameters appears; also the original R108 radio dos not have the navigation parameters selected (it shows "NAV0/CDC0/AUX0" on the radio parameters) but navigation works fine with that radio. Can the settings be performed through DDT4all and ELM327 with the changed pins for multimedia - 6-14 to 12-13)? Or the only ay i going to Renault car workshop with "official" CLIP? Thanks for all the help and regards.
