DDT2000 database

[AndyIreland]

Just wondering who writes the actual DDT2000 Database so that the parameters can be changed on the ECU's ?

I am using what I think is the latest ECU database 09/07/2019 (unless someone knows of newer?)

I have 2 Renault cars at the moment a Clio Mk4 and a Renault Zoe electric vehicle.

On the cluster for the Clio Mk4 Cluster X98_X87_X82_xHA_X98ph2_X87ph2_xHAph2_v8.02 Cluster/TDB I can change various parameters such as disable rear seatbelt reminder on dashboard cluster and Disable EPS warning on Dashboard cluster among other things .

On the Renault Zoe cluster setting TdB_X10_V1.12 Cluster/TDB I want to disable those 2 warnings , but apart from the fact that the cluster parameter settings in the x10 Zoe is all written in french, in DDT4ALL I cannot find any settings to disable the EPS and rear seatbelt warnings in the parameters for the dashboard cluster of the Zoe . - the Zoe cluster has a totally TFT screen by the way and the Clio mk4 has dials and a matrix screen.

I was going to try and take a chance to disable EPS and rear seatbelt warning using the parameters of the X98_X87_X82_xHA_X98ph2_X87ph2_xHAph2_v8.02 Cluster/TDB for the Zoe but decided against because it could damage the ecu or cluster for the zoe using the wrong ECU settings I should imagine.

any ideas ? thanks. @cedricp and others

Here is Cluster TDB settings for Renault Zoe EV:

Here is setting for Clio Mk4

[KarelSvo]

Config Generale_Inhib SBR_av ON - Buzzer SBR avant non inhibé (par défaut) OFF - Buzzer SBR avant inhibe

[AndyIreland]

Config Generale_Inhib SBR_av ON - Buzzer SBR avant non inhibé (par défaut) OFF - Buzzer SBR avant inhibe

Thank you - but that just turns off the buzzer - it does not get rid of the message on the cluster saying '0 rear sealtbelts connected'

[Furtif]

https://github.com/cedricp/ddt4all/issues/836

[manio]

@AndyIreland

Config Generale_Inhib SBR_av ON - Buzzer SBR avant non inhibé (par défaut) OFF - Buzzer SBR avant inhibe

Thank you - but that just turns off the buzzer - it does not get rid of the message on the cluster saying '0 rear sealtbelts connected'

Andy, I want to do the same change on ZOE (inhibit the buzzer) also I also has this in french. Some questions - maybe you remember and can tell me:

1. How to prepare? Do i need to start the engine (brake pedal + P), or this is irrelevant ? Is there some specific procedure before writing the "Meter cluster" settings?
2. I assume that I need to click yellow button 'Inhibit SBR av' after a value change, so this single setting is saved, but what next - is the "Prise en compte des configurations" sufficient, or I also need to click "Retour a la config par default" at the very bottom ?

[AndyIreland]

@manio - here you go:

just do it with car not ready ('engine' off) and keycard in slot when you press Prise en compte des configurations dash will briefly go dark/blank and you may get a few error messages briefly like ' Check ESC/HILL START/ABS' - dont worry about that , as long as the dash lights up again you should be OK. ** DO AT YOUR OWN RISK**

[manio]

Thank you very much, Andy! :)