Chee-Yang, Chau

This is my current setting: ``` # flash get HW_HWVER HW_HWVER=168D.A # flash get GPON_ONU_MODEL GPON_ONU_MODEL=HG8240H5 # flash get ELAN_MAC_ADDR ELAN_MAC_ADDR=6cefc6bed812 # flash get VS_AUTH_KEY VS_AUTH_KEY=7e,c8,c9,dc,c0,23,54,85,1d,c2,32,80,36,8f,2f,af,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ``` After reboot, my...

No luck after execute your script. I assume these two lines has typo mistake: ``` flash get OMCI_OLT_MODE 1 flash get OMCI_FAKE_OK 1 ``` I have changed to `set` when...

Yes, I reboot before I try after execute those `flash set` command.

I also try to plug the GPON stick to another old model L2 switch, still the same.

[S5860-20SQ](https://www.fs.com/sg/products/108710.html) [DGS-1210-20](https://www.dlink.com/en/products/dgs-1210-20-20-port-gigabit-smart-managed-switch)

I don't have RB3011 and Fortigate. Is MikroTik ok?

I have [CRS326-24G-2S+](https://mikrotik.com/product/CRS326-24G-2SplusRM). Will try tomorrow.

I have test all other switches I have. Fail to detect the GPON stick: - MikroTik [CRS326-24G-2S+](https://mikrotik.com/product/CRS326-24G-2SplusRM) cannot detect the GPON stick at all. These switches can ping to the...

I prefer direct plug the GPON stick to my L2/L3 switch so I reduce a 12VDC power adapter to power the external device like TM's Huawei GPON.

How to identify the hardware of my GPON stick?