Chris Friesen

See https://github.com/helm/helm/pull/8671 for the original context, but basically this is a rebase of the original fix from that pull request. I contacted Sean Eagan privately and he said that he...

This issue is causing problems for FluxCD currently: https://github.com/fluxcd/helm-controller/issues/81

Just wondering if any of the maintainers have had a chance to look at this yet...

This issue is definitely still open, and is causing issues for FluxCD.

I did a brief bench-test experiment, and by default ACRO mode provided an impulse response to counteract a disturbance. In my experiment rolling the flight controller quickly 90 degrees to...

It's worth noting that for ArduCopter, ACRO mode defaults to what ArduPlane mode does with ACRO_LOCKING enabled. To get the equivalent of ACRO_LOCKING disabled you have to set "rate loop...

I don't think there's any appetite for pulling this in, but I've rebased the code change and made it available at https://github.com/cbf123/helm/tree/wait-1-replica-rebased

Seems to still be an issue in AP_VideoTX.cpp as upper bound is still 1000 // @Range: 25 1000 AP_GROUPINFO("MAX_POWER", 7, AP_VideoTX, _max_power_mw, 800),

It might be useful to show the current draw on the same graph. In the Youtube video comments you mentioned that the current consumption drops relatively smoothly while the mechanical...

Reposting comment from sskaug in rcgroups.com: > When we had the initial report of injury and started implementing improvements for Rev32.10, during the course of the development it turned out...