Logitech G920 doesn't work properly on switch.

[Literalgamer81]

Description Recently I've tried to use my logitech g920 on my switch using sys-con but it acted as if there was a constant down input and the wheel movements aren't recognized. I was messing around with the settings and I fixed the constant down input issue but the wheel is still not recognized and the pedals do not work. The only thing that does work are the face buttons and the paddle shifters. When looking at the logs, I noticed that the switch recognizes the wheel as a xboxone controller. Another thing that happened was that the wheel didn't do the calibration that it usually does when I plug it into my pc. I am running firmware version 18.1.0 with atmosphere 1.7.1 on Here are the logs.

00d 00:00:07:

New sysmodule session started on version 0.6.4 00d 00:00:07: Starting config check thread! 00d 00:00:55: Catch-all event went off 00d 00:00:55: Inserting controller as HDLs 00d 00:00:55: Initializing Xbox One controller: 0x0 00d 00:01:03: Interface state was changed 00d 00:01:03: Erasing controller 00d 00:01:03: Controller erased! 00d 00:01:16: Catch-all event went off 00d 00:01:16: Inserting controller as HDLs 00d 00:01:17: Initializing Xbox One controller: 0x0 00d 00:01:17: Interface state was changed 00d 00:01:17: Erasing controller 00d 00:01:17: Controller erased! 00d 00:01:17: Catch-all event went off 00d 00:01:18: Inserting controller as HDLs 00d 00:01:18: Initializing Xbox One controller: 0x0 00d 00:01:18: Interface state was changed 00d 00:01:18: Erasing controller 00d 00:01:18: Controller erased! 00d 00:01:18: Catch-all event went off 00d 00:01:18: Inserting controller as HDLs 00d 00:01:18: Initializing Xbox One controller: 0x0 00d 00:03:07: Interface state was changed

[o0Zz]

Hi, Try this fork https://github.com/o0Zz/sys-con

[aBrOkEnKeYbOaRd]

Hi I tried this and it works with my g920 but its actively acting like if it's always pressing down input on the left joycon. Is there any way to fix this?

[o0Zz]

Hi, yes there is lot of documentation there: https://github.com/o0Zz/sys-con/blob/master/README.md and there https://github.com/o0Zz/sys-con/blob/master/doc/Troubleshooting.md

You will probably have to tune your configuration with such kind of parameters:

[vid-pid]
lstick_left=-X
lstick_right=+X
lstick_up=+Y
lstick_down=-Y

I assume your controller simulate Y with the pedal and that the reason why you have that. Try to determine with windows joy.cpl what are the default configuration of your logitech and bind them properly on the switch. Theoritically, you can bind everything on anything thus you should find a working configuration at some point. Feel free to share your configuration for your g920 once found, it will be usefull for other.

[Victorf1596]

Does someone find a correct configuration for Logitech g920? I ve looking for It about months...

[o0Zz]

Did you try the fork mentionned in this post ? https://github.com/o0Zz/sys-con if yes and if you have issue please post it on https://github.com/o0Zz/sys-con with logs