[ENH] Create a way to pre-program a workout for echelon bikes

[ptrinephi]

Implement a way to "program" automated resistance changes for a workout. For example one may want 5mintues at resistance 10 then 10mn@14, 10@16, 5@10... I'm not sure what kind of interface you want to create to enter the data but maybe for v1 read a txt file that has data like: time@resistance<CR> 5@10 10@14 10@16 5@10

The last entry would basically mean go forever at resistance 10 or maybe when the last entry is completed set the resistance back to the users' setting.

[cagnulein]

It's already possibile in the last beta version ;)

Il lun 1 mar 2021, 20:34 3phi [email protected] ha scritto:

Assigned #181 https://github.com/cagnulein/qdomyos-zwift/issues/181 to @cagnulein https://github.com/cagnulein.

— You are receiving this because you were assigned. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#event-4391519363, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWFXEXXOFZGQ3JOV7ALTBPT6BANCNFSM4YNE3FYA .

[ptrinephi]

Really? I must have missed that! where are the instructions?

------ Original Message ------ From: "Roberto Viola" [email protected] To: "cagnulein/qdomyos-zwift" [email protected] Cc: "3phi" [email protected]; "Author" [email protected] Sent: 3/1/2021 11:51:10 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

It's already possibile in the last beta version ;)

Il lun 1 mar 2021, 20:34 3phi [email protected] ha scritto:

Assigned #181 https://github.com/cagnulein/qdomyos-zwift/issues/181 to @cagnulein https://github.com/cagnulein.

— You are receiving this because you were assigned. Reply to this email directly, view it on GitHub

https://github.com/cagnulein/qdomyos-zwift/issues/181#event-4391519363,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/AAALYWFXEXXOFZGQ3JOV7ALTBPT6BANCNFSM4YNE3FYA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-788223921, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABSMNPRUJUK3FN57LDHWXJLTBPV25ANCNFSM4YNE3FYA.

[cagnulein]

https://www.facebook.com/groups/149984563348738/permalink/177286447285216/

Il lun 1 mar 2021, 21:22 3phi [email protected] ha scritto:

Really? I must have missed that! where are the instructions?

------ Original Message ------ From: "Roberto Viola" [email protected] To: "cagnulein/qdomyos-zwift" [email protected] Cc: "3phi" [email protected]; "Author" [email protected] Sent: 3/1/2021 11:51:10 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

It's already possibile in the last beta version ;)

Il lun 1 mar 2021, 20:34 3phi [email protected] ha scritto:

Assigned #181 https://github.com/cagnulein/qdomyos-zwift/issues/181 to @cagnulein https://github.com/cagnulein.

— You are receiving this because you were assigned. Reply to this email directly, view it on GitHub

https://github.com/cagnulein/qdomyos-zwift/issues/181#event-4391519363,

or unsubscribe

< https://github.com/notifications/unsubscribe-auth/AAALYWFXEXXOFZGQ3JOV7ALTBPT6BANCNFSM4YNE3FYA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-788223921>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABSMNPRUJUK3FN57LDHWXJLTBPV25ANCNFSM4YNE3FYA .

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-788245139, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWCJ5JLB34FWHLCJKNLTBPZPDANCNFSM4YNE3FYA .

[ptrinephi]

Excellent, I didn't see that, thanks

------ Original Message ------ From: "Roberto Viola" [email protected] To: "cagnulein/qdomyos-zwift" [email protected] Cc: "3phi" [email protected]; "Author" [email protected] Sent: 3/1/2021 12:24:03 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

https://www.facebook.com/groups/149984563348738/permalink/177286447285216/

Il lun 1 mar 2021, 21:22 3phi [email protected] ha scritto:

Really? I must have missed that! where are the instructions?

------ Original Message ------ From: "Roberto Viola" [email protected] To: "cagnulein/qdomyos-zwift" [email protected] Cc: "3phi" [email protected]; "Author" [email protected] Sent: 3/1/2021 11:51:10 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

It's already possibile in the last beta version ;)

Il lun 1 mar 2021, 20:34 3phi [email protected] ha scritto:

Assigned #181 https://github.com/cagnulein/qdomyos-zwift/issues/181 to @cagnulein https://github.com/cagnulein.

— You are receiving this because you were assigned. Reply to this email directly, view it on GitHub

https://github.com/cagnulein/qdomyos-zwift/issues/181#event-4391519363,

or unsubscribe

<

https://github.com/notifications/unsubscribe-auth/AAALYWFXEXXOFZGQ3JOV7ALTBPT6BANCNFSM4YNE3FYA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-788223921>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABSMNPRUJUK3FN57LDHWXJLTBPV25ANCNFSM4YNE3FYA

.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-788245139,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/AAALYWCJ5JLB34FWHLCJKNLTBPZPDANCNFSM4YNE3FYA

.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-788246576, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABSMNPVKHIU2UMHIHA4BFYTTBPZWHANCNFSM4YNE3FYA.

[cagnulein]

@ptrinephi did you try to use it? because i tried on the treadmill and it work well but i didn't try to the bike ;)

[ptrinephi]

I've created a simple file and uploaded it to the phone, selected the Open Train Program and loaded my file. It then says "Program has been loaded correctly. Press start to begin" then nothing happens. Resistance stays at 1.

Also, the open train program option opens any types of files and always says "Program has been loaded correctly. Press start to begin"

------ Original Message ------ From: "Roberto Viola" [email protected] To: "cagnulein/qdomyos-zwift" [email protected] Cc: "3phi" [email protected]; "Mention" [email protected] Sent: 3/2/2021 01:51:13 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

@ptrinephi https://github.com/ptrinephi did you try to use it? because i tried on the treadmill and it work well but i didn't try to the bike ;)

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-788777252, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABSMNPQD4U6TYOMQQBZJMF3TBSYJDANCNFSM4YNE3FYA.

[cagnulein]

Did you press start and start riding? The resistance will follow your program

Il mar 2 mar 2021, 18:56 3phi [email protected] ha scritto:

I've created a simple file and uploaded it to the phone, selected the Open Train Program and loaded my file. It then says "Program has been loaded correctly. Press start to begin" then nothing happens. Resistance stays at 1.

Also, the open train program option opens any types of files and always says "Program has been loaded correctly. Press start to begin"

------ Original Message ------ From: "Roberto Viola" [email protected] To: "cagnulein/qdomyos-zwift" [email protected] Cc: "3phi" [email protected]; "Mention" [email protected] Sent: 3/2/2021 01:51:13 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

@ptrinephi https://github.com/ptrinephi did you try to use it? because i tried on the treadmill and it work well but i didn't try to the bike ;)

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-788777252>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABSMNPQD4U6TYOMQQBZJMF3TBSYJDANCNFSM4YNE3FYA .

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-789096099, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWF6HNVERK3MI4RUS53TBURGLANCNFSM4YNE3FYA .

[ptrinephi]

This feature does not seem to work. I load my program and press start and pedal but the resistance never changes.

------ Original Message ------ From: "Roberto Viola" [email protected] To: "cagnulein/qdomyos-zwift" [email protected] Cc: "3phi" [email protected]; "Mention" [email protected] Sent: 3/2/2021 10:20:26 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

Did you press start and start riding? The resistance will follow your program

Il mar 2 mar 2021, 18:56 3phi [email protected] ha scritto:

I've created a simple file and uploaded it to the phone, selected the Open Train Program and loaded my file. It then says "Program has been loaded correctly. Press start to begin" then nothing happens. Resistance stays at 1.

Also, the open train program option opens any types of files and always says "Program has been loaded correctly. Press start to begin"

------ Original Message ------ From: "Roberto Viola" [email protected] To: "cagnulein/qdomyos-zwift" [email protected] Cc: "3phi" [email protected]; "Mention" [email protected] Sent: 3/2/2021 01:51:13 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

@ptrinephi https://github.com/ptrinephi did you try to use it? because i tried on the treadmill and it work well but i didn't try to the bike ;)

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-788777252>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABSMNPQD4U6TYOMQQBZJMF3TBSYJDANCNFSM4YNE3FYA

.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-789096099,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/AAALYWF6HNVERK3MI4RUS53TBURGLANCNFSM4YNE3FYA

.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-789111879, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABSMNPU6KNSJL6LXYCJFGSLTBUT6VANCNFSM4YNE3FYA.

[cagnulein]

Are you using version 2.4.5? Because from the last screenshot seems not. Anyway just send me the log if you're using the last one. Thanks

Il gio 4 mar 2021, 06:42 3phi [email protected] ha scritto:

This feature does not seem to work. I load my program and press start and pedal but the resistance never changes.

------ Original Message ------ From: "Roberto Viola" [email protected] To: "cagnulein/qdomyos-zwift" [email protected] Cc: "3phi" [email protected]; "Mention" [email protected] Sent: 3/2/2021 10:20:26 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

Did you press start and start riding? The resistance will follow your program

Il mar 2 mar 2021, 18:56 3phi [email protected] ha scritto:

I've created a simple file and uploaded it to the phone, selected the Open Train Program and loaded my file. It then says "Program has been loaded correctly. Press start to begin" then nothing happens. Resistance stays at 1.

Also, the open train program option opens any types of files and always says "Program has been loaded correctly. Press start to begin"

------ Original Message ------ From: "Roberto Viola" [email protected] To: "cagnulein/qdomyos-zwift" [email protected] Cc: "3phi" [email protected]; "Mention" [email protected] Sent: 3/2/2021 01:51:13 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

@ptrinephi https://github.com/ptrinephi did you try to use it? because i tried on the treadmill and it work well but i didn't try to the bike ;)

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-788777252

,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABSMNPQD4U6TYOMQQBZJMF3TBSYJDANCNFSM4YNE3FYA

.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub

< https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-789096099 ,

or unsubscribe

< https://github.com/notifications/unsubscribe-auth/AAALYWF6HNVERK3MI4RUS53TBURGLANCNFSM4YNE3FYA

.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-789111879>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABSMNPU6KNSJL6LXYCJFGSLTBUT6VANCNFSM4YNE3FYA .

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-790309480, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWF6AGVTJQGDNQUPTADTB4MTRANCNFSM4YNE3FYA .

[ptrinephi]

Just upgraded to 2.4.5 and still not working

debug-Wed Mar 3 21_52_44 2021.zip

[cagnulein]

I guess i got the issue

Warning: QObject::connect: No such slot echelonconnectsport::changeResistance(double) in ../src/homeform.cpp:281

I will check it today Thanks for reporting it

Il gio 4 mar 2021, 06:56 3phi [email protected] ha scritto:

Just upgraded to 2.4.5 and still not working

debug-Wed Mar 3 21_52_44 2021.zip https://github.com/cagnulein/qdomyos-zwift/files/6081163/debug-Wed.Mar.3.21_52_44.2021.zip

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-790316937, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWDNNUVRXUEK5H5MXDLTB4OI3ANCNFSM4YNE3FYA .

[cagnulein]

it should be fixed in version 2.4.6 @ptrinephi

[cagnulein]

@ptrinephi did you test this?

[ptrinephi]

Sorry I've been injured so no biking this entire week!

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/12/2021 01:02:59 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

@.*** https://github.com/ptrinephi did you test this?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797344574, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABSMNPXOEKYON673ED75JKDTDHKEHANCNFSM4YNE3FYA.

[cagnulein]

Oh I'm sorry! Hoping not so bad!

Il ven 12 mar 2021, 21:55 3phi @.***> ha scritto:

Sorry I've been injured so no biking this entire week!

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/12/2021 01:02:59 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

@.*** https://github.com/ptrinephi did you test this?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797344574>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABSMNPXOEKYON673ED75JKDTDHKEHANCNFSM4YNE3FYA .

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797749603, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWCD4QOYFRW7FV74BALTDJ5TZANCNFSM4YNE3FYA .

[ptrinephi]

no worries, I go out on a real bike twice a week, last ride was a bit rough twisted my ankle!

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/12/2021 13:43:20 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

Oh I'm sorry! Hoping not so bad!

Il ven 12 mar 2021, 21:55 3phi @.***> ha scritto:

Sorry I've been injured so no biking this entire week!

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/12/2021 01:02:59 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

@.*** https://github.com/ptrinephi did you test this?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797344574>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABSMNPXOEKYON673ED75JKDTDHKEHANCNFSM4YNE3FYA

.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797749603,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/AAALYWCD4QOYFRW7FV74BALTDJ5TZANCNFSM4YNE3FYA

.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797772443, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABSMNPTPLNHXIBBOUBGUUGDTDKDHRANCNFSM4YNE3FYA.

[ptrinephi]

I tried it yesterday and it worked but today it didn't. I think I'm not clear on the exact process. After selected the training program does it start right away? Do I need to pause then press start to start the program? Do I need to have option "pause on start" turned on? It's not very clear.

Maybe it should start the program as soon as you load the training?

Also, it should complain if you load an incompatible file, right now it just says "press start" even when you load junk file.

------ Original Message ------ From: "Pierre" @.> To: "cagnulein/qdomyos-zwift" @.>; "cagnulein/qdomyos-zwift" @.> Cc: "Mention" @.> Sent: 3/12/2021 13:58:46 Subject: Re[2]: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

no worries, I go out on a real bike twice a week, last ride was a bit rough twisted my ankle!

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/12/2021 13:43:20 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

Oh I'm sorry! Hoping not so bad!

Il ven 12 mar 2021, 21:55 3phi @.***> ha scritto:

Sorry I've been injured so no biking this entire week!

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/12/2021 01:02:59 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

@.*** https://github.com/ptrinephi did you test this?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797344574>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABSMNPXOEKYON673ED75JKDTDHKEHANCNFSM4YNE3FYA

.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797749603,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/AAALYWCD4QOYFRW7FV74BALTDJ5TZANCNFSM4YNE3FYA

.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797772443, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABSMNPTPLNHXIBBOUBGUUGDTDKDHRANCNFSM4YNE3FYA.

[cagnulein]

Yes it will start when you press start, so I'd you already started it you should pause and then start again. I know that it's not very clear, this function was created only for my girl friend ;) I will improve it in the future R.

Il dom 14 mar 2021, 19:56 3phi @.***> ha scritto:

I tried it yesterday and it worked but today it didn't. I think I'm not clear on the exact process. After selected the training program does it start right away? Do I need to pause then press start to start the program? Do I need to have option "pause on start" turned on? It's not very clear.

Maybe it should start the program as soon as you load the training?

Also, it should complain if you load an incompatible file, right now it just says "press start" even when you load junk file.

------ Original Message ------ From: "Pierre" @.> To: "cagnulein/qdomyos-zwift" @.>; "cagnulein/qdomyos-zwift" @.> Cc: "Mention" @.> Sent: 3/12/2021 13:58:46 Subject: Re[2]: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

no worries, I go out on a real bike twice a week, last ride was a bit rough twisted my ankle!

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/12/2021 13:43:20 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

Oh I'm sorry! Hoping not so bad!

Il ven 12 mar 2021, 21:55 3phi @.***> ha scritto:

Sorry I've been injured so no biking this entire week!

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/12/2021 01:02:59 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

@.*** https://github.com/ptrinephi did you test this?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797344574

,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABSMNPXOEKYON673ED75JKDTDHKEHANCNFSM4YNE3FYA

.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub

< https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797749603 ,

or unsubscribe

< https://github.com/notifications/unsubscribe-auth/AAALYWCD4QOYFRW7FV74BALTDJ5TZANCNFSM4YNE3FYA

.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797772443>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABSMNPTPLNHXIBBOUBGUUGDTDKDHRANCNFSM4YNE3FYA .

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-798959709, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWFZHREPMJ6JGOJZWZLTDUBEHANCNFSM4YNE3FYA .

[ptrinephi]

It's a great feature, thanks

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/14/2021 11:58:11 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

Yes it will start when you press start, so I'd you already started it you should pause and then start again. I know that it's not very clear, this function was created only for my girl friend ;) I will improve it in the future R.

Il dom 14 mar 2021, 19:56 3phi @.***> ha scritto:

I tried it yesterday and it worked but today it didn't. I think I'm not clear on the exact process. After selected the training program does it start right away? Do I need to pause then press start to start the program? Do I need to have option "pause on start" turned on? It's not very clear.

Maybe it should start the program as soon as you load the training?

Also, it should complain if you load an incompatible file, right now it just says "press start" even when you load junk file.

------ Original Message ------ From: "Pierre" @.> To: "cagnulein/qdomyos-zwift" @.>; "cagnulein/qdomyos-zwift" @.> Cc: "Mention" @.> Sent: 3/12/2021 13:58:46 Subject: Re[2]: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

no worries, I go out on a real bike twice a week, last ride was a bit rough twisted my ankle!

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/12/2021 13:43:20 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

Oh I'm sorry! Hoping not so bad!

Il ven 12 mar 2021, 21:55 3phi @.***> ha scritto:

Sorry I've been injured so no biking this entire week!

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/12/2021 01:02:59 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

@.*** https://github.com/ptrinephi did you test this?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797344574

,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABSMNPXOEKYON673ED75JKDTDHKEHANCNFSM4YNE3FYA

.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub

<

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797749603

,

or unsubscribe

<

https://github.com/notifications/unsubscribe-auth/AAALYWCD4QOYFRW7FV74BALTDJ5TZANCNFSM4YNE3FYA

.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797772443>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABSMNPTPLNHXIBBOUBGUUGDTDKDHRANCNFSM4YNE3FYA

.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-798959709,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/AAALYWFZHREPMJ6JGOJZWZLTDUBEHANCNFSM4YNE3FYA

.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-798960033, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABSMNPXEJJRA5CRHOZIFCTTTDUBMHANCNFSM4YNE3FYA.

[ptrinephi]

Roberto,

Allow me to make a few suggestions for this feature:

1.When opening the list of file selection, only display the files with extension *.xml or *.qzt for (qdomyos-zwift training). This would make it easier to find the training files in the download folder full of debug, wip, and junk files. 2.Check the file format to make sure it's a valid QZT file. If an incompatible file is loaded, throw a message and prompt again. 3.On successful load, either: 3.1.auto start the training or 3.2.prompt the user to start the training 4.When the training is loaded, change the Zwift icon to a QZT icon to indicate a QZTraining is active. (I don't think people will use zwift and QZTraining at the same time) 4.1.Make the QZT icon disabled or gray when the training is not running 4.2.Make theQZT icon full color when the training is active 5.When the training is complete, make the QZT icon disabled/gray. 6.When the training is active, press the QZT icon to pause the training and make QZT icon blink, press again to resume the training. While QZT is paused the workout continues. If the workout is paused, QZT should be paused as well. Resuming the workout also resumes the training. 7.Add a global offset to the resistance. For example, if I feel strong today I may want to add 2 resistance to every steps (or decrease by 2 because my ankle is weak today!)

I know it's a lot but it's just ideas, all of which would make it a really nice training interface.

Thanks,

PT

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/14/2021 11:58:11 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

Yes it will start when you press start, so I'd you already started it you should pause and then start again. I know that it's not very clear, this function was created only for my girl friend ;) I will improve it in the future R.

Il dom 14 mar 2021, 19:56 3phi @.***> ha scritto:

I tried it yesterday and it worked but today it didn't. I think I'm not clear on the exact process. After selected the training program does it start right away? Do I need to pause then press start to start the program? Do I need to have option "pause on start" turned on? It's not very clear.

Maybe it should start the program as soon as you load the training?

Also, it should complain if you load an incompatible file, right now it just says "press start" even when you load junk file.

------ Original Message ------ From: "Pierre" @.> To: "cagnulein/qdomyos-zwift" @.>; "cagnulein/qdomyos-zwift" @.> Cc: "Mention" @.> Sent: 3/12/2021 13:58:46 Subject: Re[2]: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

no worries, I go out on a real bike twice a week, last ride was a bit rough twisted my ankle!

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/12/2021 13:43:20 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

Oh I'm sorry! Hoping not so bad!

Il ven 12 mar 2021, 21:55 3phi @.***> ha scritto:

Sorry I've been injured so no biking this entire week!

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/12/2021 01:02:59 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

@.*** https://github.com/ptrinephi did you test this?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797344574

,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABSMNPXOEKYON673ED75JKDTDHKEHANCNFSM4YNE3FYA

.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub

<

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797749603

,

or unsubscribe

<

https://github.com/notifications/unsubscribe-auth/AAALYWCD4QOYFRW7FV74BALTDJ5TZANCNFSM4YNE3FYA

.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797772443>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABSMNPTPLNHXIBBOUBGUUGDTDKDHRANCNFSM4YNE3FYA

.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-798959709,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/AAALYWFZHREPMJ6JGOJZWZLTDUBEHANCNFSM4YNE3FYA

.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-798960033, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABSMNPXEJJRA5CRHOZIFCTTTDUBMHANCNFSM4YNE3FYA.

[cagnulein]

Yeah a ton of work :) But you have definitely right. I will improve it! For 7. You can already doing it using the plus and minus Buttons on the Target resistance tiles

Il lun 15 mar 2021, 03:20 3phi @.***> ha scritto:

Roberto,

Allow me to make a few suggestions for this feature:

1.When opening the list of file selection, only display the files with extension *.xml or *.qzt for (qdomyos-zwift training). This would make it easier to find the training files in the download folder full of debug, wip, and junk files. 2.Check the file format to make sure it's a valid QZT file. If an incompatible file is loaded, throw a message and prompt again. 3.On successful load, either: 3.1.auto start the training or 3.2.prompt the user to start the training 4.When the training is loaded, change the Zwift icon to a QZT icon to indicate a QZTraining is active. (I don't think people will use zwift and QZTraining at the same time) 4.1.Make the QZT icon disabled or gray when the training is not running 4.2.Make theQZT icon full color when the training is active 5.When the training is complete, make the QZT icon disabled/gray. 6.When the training is active, press the QZT icon to pause the training and make QZT icon blink, press again to resume the training. While QZT is paused the workout continues. If the workout is paused, QZT should be paused as well. Resuming the workout also resumes the training. 7.Add a global offset to the resistance. For example, if I feel strong today I may want to add 2 resistance to every steps (or decrease by 2 because my ankle is weak today!)

I know it's a lot but it's just ideas, all of which would make it a really nice training interface.

Thanks,

PT

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/14/2021 11:58:11 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

Yes it will start when you press start, so I'd you already started it you should pause and then start again. I know that it's not very clear, this function was created only for my girl friend ;) I will improve it in the future R.

Il dom 14 mar 2021, 19:56 3phi @.***> ha scritto:

I tried it yesterday and it worked but today it didn't. I think I'm not clear on the exact process. After selected the training program does it start right away? Do I need to pause then press start to start the program? Do I need to have option "pause on start" turned on? It's not very clear.

Maybe it should start the program as soon as you load the training?

Also, it should complain if you load an incompatible file, right now it just says "press start" even when you load junk file.

------ Original Message ------ From: "Pierre" @.> To: "cagnulein/qdomyos-zwift" @.>; "cagnulein/qdomyos-zwift" @.> Cc: "Mention" @.> Sent: 3/12/2021 13:58:46 Subject: Re[2]: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

no worries, I go out on a real bike twice a week, last ride was a bit rough twisted my ankle!

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/12/2021 13:43:20 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

Oh I'm sorry! Hoping not so bad!

Il ven 12 mar 2021, 21:55 3phi @.***> ha scritto:

Sorry I've been injured so no biking this entire week!

------ Original Message ------ From: "Roberto Viola" @.> To: "cagnulein/qdomyos-zwift" @.> Cc: "3phi" @.>; "Mention" @.> Sent: 3/12/2021 01:02:59 Subject: Re: [cagnulein/qdomyos-zwift] [ENH] Create a way to pre-program a workout for echelon bikes (#181)

@.*** https://github.com/ptrinephi did you test this?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797344574

,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABSMNPXOEKYON673ED75JKDTDHKEHANCNFSM4YNE3FYA

.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub

<

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797749603

,

or unsubscribe

<

https://github.com/notifications/unsubscribe-auth/AAALYWCD4QOYFRW7FV74BALTDJ5TZANCNFSM4YNE3FYA

.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-797772443

,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABSMNPTPLNHXIBBOUBGUUGDTDKDHRANCNFSM4YNE3FYA

.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub

< https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-798959709

, or unsubscribe

< https://github.com/notifications/unsubscribe-auth/AAALYWFZHREPMJ6JGOJZWZLTDUBEHANCNFSM4YNE3FYA

.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-798960033>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABSMNPXEJJRA5CRHOZIFCTTTDUBMHANCNFSM4YNE3FYA

.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/181#issuecomment-799045406, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWGOBVXHDCYQYUCY3DTTDVVGRANCNFSM4YNE3FYA .

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.