c0pperdragon

Oops - I was mistaken. The Atari mod firmware does not support RGsB at all. It will only ever output YPbPr. There is a jumper option to output a very...

So I guess, it is your intention to build a Genesis 2 - compatible A/V port into your atari 5200. This is a pretty cool idea to re-use the rest...

I have just created a specific A600 thread. https://github.com/c0pperdragon/Amiga-Digital-Video/issues/22

I guess this should in theory be possible when the software is prepared for that. @IanSB is the expert on that. Maybe you could do that by patching the config.txt...

I forgot where I got this expansion from. But it is actually working great. It is also compatible with the 1 MB chip ram modification for my particular main board.

Just look at the bottom of the project main page.

I see you already found the relevant issue thread already. I would have recommended the pixel clock mod anyway. But I am not sure how this works together with your...

My test of choice for PAL mode is the "EdgeOfDisgrace" demo, as it uses nearly any trick that were ever possible with the VIC-II. With its excessive use of sprites...

After second consideration, the best approuch for your setup is to actually tackle the real issue and get the clock generator straight. When you have an oscilloscope, you should be...

Also I wanted to mention, that by feeding the clock output from the FPGA into the VIC in (as you tried already) you will not get any color on the...