c0pperdragon

This is totally awesome, that you start to integrate lumacode support into the OSSC. I very much think there is a huge number of existing OSSC users that would love...

I have bin watching this thread with great interest. Nice to see support for lumacode on the OSSC. @TheRetroChannel Mark, can you already confirm that the color emphasis bits are...

Thank you for confirming that the emphasis bits now work. I took the palette for the RGBtoHDMI from this wikipedia page: https://en.wikipedia.org/wiki/List_of_video_game_console_palettes#Nintendo But in the end, we should provide multiple...

From what you say, I guess you have installed the FPGA board correctly. You did not say anything about the VIC-II pick-up board, but this is hard to mess up...

I guess, your problem is caused by the clock generator circuit on your specific board. In some cases the clock signal is so uneven that the mod can not properly...

If you want to use the mod board to generate the pixel clock for an NTSC machine, you need firmware revision 2.10 . For a PAL machine this was supported...

I just opened an issue thread firmware flashing, as this seems to become an issue recently: https://github.com/c0pperdragon/C64-Video-Enhancement/issues/80 Maybe share some screenshot of your programmer version so we can get the...

Looking at your picture, it seems that you are feeding the clock signal into the wrong pin on the JTAG header. You need to feed this into pin 5. I...

I guess you are noticing some moving distortion of the color. This is caused by the fact that the dot clock and the color clock are no longer in a...

Yes, the second problem posted into this issue was completely unrelated to the original post. I have now removed those entries to not confuse the matter any longer. If you...