Unable to setup MSS310

[rolfmcduff]

I can successfully connect to the device and get the device information by the meross-info script. But when I want to setup the device I get the following log output and I can see no logs in the Mosquitto broker and the dece is not connected to the broker. What am I doing wrong?

Although I am connected to the device's access point and can also run the info script successfully, the setup script fails.

PS: I marked secrets with <!.

./meross setup --gateway 10.10.10.1 --wifi-ssid 'FRITZ!Box Fon WLAN 7360 SL' --wifi-pass --mqtt mqtt://192.168.178.76:8883 --wifi-cipher 3 --wifi-encryption 6 --wifi-channel 1 Setting up device with IP 10.10.10.1 ┌───────────────────────────────────────────────┬─────────────────────────────────────────────┐ │Primary MQTT broker │192.168.178.76:8883 │ ├───────────────────────────────────────────────┼─────────────────────────────────────────────┤ │Failover MQTT broker │192.168.178.76:8883 │ └───────────────────────────────────────────────┴─────────────────────────────────────────────┘ Error Unable to connect to device ┌─────────────┬───────────────────────────────────────────────────────────────────────────────┐ │Device │mss310 un rtl8710cf (hardware:6.0.0 firmware:6.3.22) │ ├─────────────┼───────────────────────────────────────────────────────────────────────────────┤ │UUID │2208025800992751080248e1e99d5309 │ ├─────────────┼───────────────────────────────────────────────────────────────────────────────┤ │Mac address │48:e1:e9:9d:53:09 │ ├─────────────┼───────────────────────────────────────────────────────────────────────────────┤ │IP address │10.10.10.1 │ ├─────────────┼───────────────────────────────────────────────────────────────────────────────┤ │Credentials │User: │ │ │Password: │ ├─────────────┼───────────────────────────────────────────────────────────────────────────────┤ │MQTT topics │Publishes to: /appliance/2208025800992751080248e1e99d5309/publish │ │ │Subscribes to: /appliance/2208025800992751080248e1e99d5309/subscribe │ └─────────────┴───────────────────────────────────────────────────────────────────────────────┘ Device will reboot...

[Smilebags]

I've got the same issue, with verbose logging enabled the SETACK response seems to have an empty payload.

< 200 OK
< content-type: application/json
< connection: close
<
{
  header: {
    messageId: '564ae69e20c42d0fc5c4cbe6627a654d',
    namespace: 'Appliance.Config.Wifi',
    method: 'SETACK',
    payloadVersion: 1,
    from: '/appliance/2208100709673951070348e1e9a09a88/publish',
    uuid: '2208100709673951070348e1e9a09a88',
    timestamp: 151,
    timestampMs: 156,
    sign: '112e0478ef49254c2f6616f3dcef58d5'
  },
  payload: {}
}

[bytespider]

@Smilebags @rolfmcduff have you tried --use-wifi-x? alternatively there's a beta version that knows to apply it automatically. https://www.npmjs.com/package/meross/v/2.0.0-beta-1 *note that parameter names have changed in v2