2018 Mitsubishi PHEV Connection issues/setup

[DevilsDesigns]

So question. I have a 2018 Mitsubishi Outlander PHEV. I setup a vm on my unraid with ubuntu server 24.04 did all the install steps, but im a bit confused on how to link it. i have already setup the mitsubishi motors app called Remote Ctrl and i got the ssid: REMOTE34keuz and my password: mysetpassword. Inside my network config i have a static ip for my lan cable and a 2.4ghz wifi card installed passthroughed the vm with the ssid of the car and my password for the car ap. But everytime i run the script it cant verify. i keep getting a waiting after running the command

Am i doing something wrong before i run this command though in my vm on my network. I do the following to put it in pairing mode

1. opening the drivers side door closing it
2. closing the door.
3. turning the car in accesary
4. press lock and unlock alternating x5 each a total of 10 until i hear the beep once for 1 device connected ie my phone
5. then start the command on ubuntu to register
6. am i doing any steps wrong any guidence would be greatly appreciated im link losing my mind trying to get this to work

Network configuration im trying to run this command on a windows laptop outside where i have 1-2 bars on my wifi on it from my unraid vm

[altserg]

I have the same behavior. Please try my branch with various fixes https://github.com/altserg/phev2mqtt. I hope it helps

[DevilsDesigns]

I have the same behavior. Please try my branch with various fixes https://github.com/altserg/phev2mqtt. I hope it helps

i cant git clone this repo for some odd reason any idea why?

[altserg]

Strange - the repo is public, should be accessible. I can access it from 2 separate locations and via vpn On Tuesday, April 15, 2025 at 03:08:13 AM GMT+2, DevilsCoder @.***> wrote:

I have the same behavior. Please try my branch with various fixes https://github.com/altserg/phev2mqtt. I hope it helps

i cant pull this repo for some odd reason any idea why?

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***> DevilsDesigns left a comment (buxtronix/phev2mqtt#44)

I have the same behavior. Please try my branch with various fixes https://github.com/altserg/phev2mqtt. I hope it helps

i cant pull this repo for some odd reason any idea why?

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>

[DevilsDesigns]

Sorry I didn't update it was a VM issue. I restarted networkd and rebooted VM and I was able to pull the GitHub by git cloning. I'm working on trying to link it tonite

Strange - the repo is public, should be accessible. I can access it from 2 separate locations and via vpn On Tuesday, April 15, 2025 at 03:08:13 AM GMT+2, DevilsCoder @.***> wrote:

I have the same behavior. Please try my branch with various fixes https://github.com/altserg/phev2mqtt. I hope it helps

i cant pull this repo for some odd reason any idea why?

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***> DevilsDesigns left a comment (buxtronix/phev2mqtt#44)

I have the same behavior. Please try my branch with various fixes https://github.com/altserg/phev2mqtt. I hope it helps

i cant pull this repo for some odd reason any idea why?

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>

[altserg]

Please close this issue if it's gone

[DevilsDesigns]

Please close this issue if it's gone

I just resolved the VM issue the VM still isn't linking with my car