builder555
[CRITICAL] Tapping tempture change repeatedly causes sudden jumps and uncontrolled temps
To Reproduce Steps to reproduce the behaviour:
- Turn on heater on Pinecil
- Use Pinecil interface to adjust temp clicking repeatedly
Expected behaviour Temperature to only jump by the amount of clicks registered.
Actual behaviour Temperatures rises uncontrollably.
Screenshots
https://github.com/user-attachments/assets/91043d0f-21fc-4807-b0a3-994e85870260
Specs:
- OS: Arch Linux
- Browser: Firefox/Chrome
- PineSAM Version: 2.2.6
- IronOS build/date: 2.22 11/05/2023
Additional context
Clicking slowly works as expected, but if you tap repeatedly in either direction, the temps continues without user intervention until it starts trying to set invalid values. Was at a low temp and just wanted to go up a few degrees and ended up at max without intervention. Serious safety issue.
Tested with both Firefox and Chrome
https://github.com/user-attachments/assets/749dd3b5-cb01-4a85-a4b0-8cec6505823a
If it goes on long enough the iron itself starts flashing the display like it's glitching out.
Sounds like you found a hidden "don't tire your mouse out, I got this" feature :) Thank you for the report, I'll take a look this weekend.
@parkerlreed do you want to try 2.2.9? I just pushed it. I didn't install arch, but I might've found the problem. If it persists, I'll set up a vm and test it out. Which desktop environment are you using?
Of course I forgot to bring it with me on the trip.
Plasma Wayland
I'll update whenever I can test it.