Vojtěch Bubník

Autospeed was always useless.

@bubnikv autospeed works reasonably well when you disable gapfill, so I respectfully disagree. But if you feel it always was useless, maybe remove it? Some features are kept for the...

What benefits do you expect the watertight gyroid will bring? edit > This gave me a lot of inspiration to try and fill out the two cavities in the gyroid...

Extrusions with height higher than width are considered non-printable. This project has an excessive first layer height (0.28mm) versus narrow extrusion lines (0.2mm). We shall improve the error reporting.

> As a slicer user i would assume unprintable extrusions aren't done at all I am not sure that would be a good solution. Missing extrusions without any warning would...

> Either that or as a program setting that gets asked for when you start the slicer the first time (ask for automatic error submission permission). Some extrusion path parameters...

You are right PrusaSlicer 2.3.3 sliced your model without any complaints. I have also verified that we have a check before slicing for the extrusion width vs. layer height ratio,...

@[wenbilliams](https://github.com/wenbilliams) Multi-material segmentation is on our radar, however the issue we are facing is that we want to combine various sources of color segmentation (multiple volumes, modifiers, upcoming text) with...

> Additionally: when going back to the 3D editor view after slicing, the wipe tower isn't there anymore. Before slicing the wipe tower size is not known. After slicing it...

> Out of interest, is the service provided by Microsoft an API callout of some kind? Netfabb for Linux *does* exist (in a much older version), and can provide similar...