Bryce Large

any chance you could put a wiring diagram together so I can test with my 3 new JK BMS?

> > any chance you could put a wiring diagram together so I can test with my 3 new JK BMS? > > [#463 (comment)](https://github.com/syssi/esphome-jk-bms/issues/463#issuecomment-1973320806) Which Ethernet wires go to...

> it is not ethernet. It is RS485, ok? You need a USB to RS485 adaptor. USB plugs into the ESP32 dev board and RJ45 into the RS485 port in...

> Updated. @denveronly, could you test this? https://github.com/txubelaxu/esphome-jk-bms/blob/main/components/jk_rs485_bms/README.md Thanks for the hard work here. Quick question, is there a reason why you have all the grounds connected together in your...

If we have 1 master and 2 slaves what would the rs485_address be on the second slave? esp32-example-jkpb-rs485.yaml shows master at rs485_address: 0x00 and first slave at rs485_address: 0x07

> > > Updated. @denveronly, could you test this? https://github.com/txubelaxu/esphome-jk-bms/blob/main/components/jk_rs485_bms/README.md > > > > > > Thanks for the hard work here. Quick question, is there a reason why you...

> > > > > Updated. @denveronly, could you test this? https://github.com/txubelaxu/esphome-jk-bms/blob/main/components/jk_rs485_bms/README.md > > > > > > > > > > > > Thanks for the hard work here....

> I have to review that. I have not changed that code but I see it was there before. How many BMS have you connected using RS485 network? 3 (1...