brunodev85
Vortek driver gives me a black screen when running a 3D test, and then it closes. (I have attached the debug.txt file to vulkan_triangle). I really hope, Bruno, that you take a look at my problem.
Mali G52's have Vulkan 1.0, you need vulkan 1.1-1.2 for vortek
Mali G52's have Vulkan 1.0, you need vulkan 1.1-1.2 for vortek
No, my Vulkan version is 1.1, and there are some more advanced devices than mine that are still facing the same issue.
Também tenho o mesmo problema no Samsung A05 ele usa a Mail g52 mc2 Helio g85 e tem Vulkan 1.1
Sadly Vortek is very, very experimental for now, your best bet is to use a Snapdragon device, at least series 800, and at minimum 6 Gb RAM (real RAM, not counting expanded RAM)
Winlator is very demanding on CPU, and sometimes both, but the most stable combo is Snapdragon device which has Turnip Adreno support for DXVK and VKD3D
Don't use dxvk older then 1.10.3 (2+ version will not work) And try this
turn of VK_EXT_Extended_dynamic_state in Vortek Exposed Extensions, then Instal "Ajay prefix" Then choose render vulkan : Start - Ajay start menu - 1.components - registry - renderer -renderer_vulkan. Done.
