ESP-MQTT-JSON-Digital-LEDs
ESP-MQTT-JSON-Digital-LEDs copied to clipboard
bruhautomation
How do you go loop
Ok im trying to find out how these strips would go to loop. When i turn them ON they just solid white and dont go to loop (they supposed to?). The code is original,just copy and paste. Do i need to do loop via mqtt i wonder or how?
Hi @KodiMkd, what do you mean when you say loop? are you talking about effects, such as the ones Ben shows in his video?
When i say loop i mean all the effects is bruh to go trough a loop..one then after 5 mins another the a other..all of them 15 lets say..and then start all over again same thing
OK, so you can do that with an automation in home assistant.
it would just be a case of triggering the first effect, then setting a delay on the automation, then start the next effect, and then repeat this for all you want
If you can just lead me with the first stage in HA then i can just copy the rest
Oliver Kostov
On Dec 6, 2017 8:05 PM, "Joeboyc2" [email protected] wrote:
OK, so you can do that with an automation in home assistant.
it would just be a case of triggering the first effect, then setting a delay on the automation, then start the next effect, and then repeat this for all you want
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/bruhautomation/ESP-MQTT-JSON-Digital-LEDs/issues/53#issuecomment-349827760, or mute the thread https://github.com/notifications/unsubscribe-auth/AYiaekL8_3UrGb4hrVJIBh9qpJDMbuyFks5s9znpgaJpZM4QAUku .