ioBroker.eusec
ioBroker.eusec copied to clipboard
bropat
ffmpegPreviewImage - Errors
Describe the bug
Whenever motion is detected by Eufy Cameras/Doorbell adapter downloading images/video (this part works) and next it tries to preview downloaded file and after that I'm getting following errors:
eufy-security.0 2021-10-26 14:32:43.765 error ffmpegPreviewImage(): ffmpeg output: eufy-security.0 2021-10-26 14:32:43.764 error ffmpegPreviewImage(): An error occurred: ffmpeg exited with code 1: Output #0, image2, to '/opt/iobroker/iobroker-data/eufy-security.0/T8010Number/last_event/T8140Number.jpeg':Output file #0 does not contain any stream
and after that: ffmpegPreviewImage(): ffmpeg stderr:ffmpeg version 4.4-static https://johnvansickle.com/ffmpeg/ Copyright (c) 2000-2021 the FFmpeg developers built with gcc 6.3.0 (Debian 6.3.0-18+deb9u1) 20170516 configuration: --enable-gpl --enable-version3 --enable-static --disable-debug --disable-ffplay --disable-indev=sndio --disable-outdev=sndio --cc=gcc --enable-fontconfig --enable-frei0r --enable-gnutls --enable-gmp --enable-libgme --enable-gray --enable-libfribidi --enable-libass --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-librubberband --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libvorbis --enable-libopus --enable-libtheora --enable-libvidstab --enable-libvo-amrwbenc --enable-libvpx --enable-libwebp --enable-libx264 --enable-libxml2 --enable-libxvid --enable-libzimg libavutil 56. 70.100 / 56. 70.100 libavcodec 58.134.100 / 58.134.100 libavformat 58. 76.100 / 58. 76.100 libavdevice 58. 13.100 / 58. 13.100 libavfilter 7.110.100 / 7.110.100 libswscale 5. 9.100 / 5. 9.100 libswresample 3. 9.100 / 3. 9.100 libpostproc 55. 9.100 / 55. 9.100[hls @ 0x43cc620] Skip ('#EXT-X-VERSION:3')[hls @ 0x43cc620] Cannot get correct #EXTINF value of segment /opt/iobroker/iobroker-data/eufy-security.0/T8010Number/last_event/T8Number.ts, set to default value to 1ms.[hls @ 0x43cc620] Opening '/opt/iobroker/iobroker-data/eufy-security.0/T8010Number/last_event/T814Number.ts' for reading[aac @ 0x43d82b0] More than one AAC RDB per ADTS frame is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.[aac @ 0x43d82b0] channel element 2.1 is not allocated[aac @ 0x43d82b0] Sample rate index in program config element does not match the sample rate index configured by the container.[aac @ 0x43d82b0] Too large remapped id is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.[aac @ 0x43d82b0] If you want to help, upload a sample of this file to https://streams.videolan.org/upload/ and contact the ffmpeg-devel mailing list. ([email protected])[aac @ 0x43d82b0] channel element 3.4 is not allocated[aac @ 0x43d82b0] Sample rate index in program config element does not match the sample rate index configured by the container.[aac @ 0x43d82b0] Inconsistent channel configuration.[aac @ 0x43d82b0] get_buffer() failed[aac @ 0x43d82b0] channel element 2.15 is not allocated[aac @ 0x43d82b0] Reserved bit set.[aac @ 0x43d82b0] Number of scalefactor bands in group (44) exceeds limit (43).[aac @ 0x43d82b0] Dependent coupling is not supported together with LTP Last message repeated 11 times[aac @ 0x43d82b0] Multiple frames in a packet.[aac @ 0x43d82b0] Sample rate index in program config element does not match the sample rate index configured by the container.[aac @ 0x43d82b0] Inconsistent channel configuration.[aac @ 0x43d82b0] get_buffer() failed[aac @ 0x43d82b0] Number of bands (5) exceeds limit (2).[aac @ 0x43d82b0] channel element 2.6 is not allocated[aac @ 0x43d82b0] channel element 2.4 is not allocated[aac @ 0x43d82b0] channel element 2.9 is not allocated[aac @ 0x43d82b0] Reserved bit set.[aac @ 0x43d82b0] Gain control is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.[aac @ 0x43d82b0] channel element 0.2 is not allocated[aac @ 0x43d82b0] Number of bands (17) exceeds limit (13).[hls @ 0x43cc620] decoding for stream 1 failed[hls @ 0x43cc620] Could not find codec parameters for stream 0 (Video: h264 ([27][0][0][0] / 0x001B), none): unspecified sizeConsider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) options[hls @ 0x43cc620] Could not find codec parameters for stream 1 (Audio: aac (LTP) ([15][0][0][0] / 0x000F), stereo, fltp): unspecified sample rateConsider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) optionsInput #0, hls, from '/opt/iobroker/iobroker-data/eufy-security.0/T8010Number/last_event/T814Number.m3u8': Duration: 00:00:00.00, start: 1.400000, bitrate: 1232 kb/s Program 0 Metadata: variant_bitrate : 0 Stream #0:0: Video: h264 ([27][0][0][0] / 0x001B), none, 90k tbr, 90k tbn, 180k tbc Metadata: variant_bitrate : 0 Stream #0:1: Audio: aac (LTP) ([15][0][0][0] / 0x000F), stereo, fltp Metadata: variant_bitrate : 0Output #0, image2, to '/opt/iobroker/iobroker-data/eufy-security.0/T8010Number/last_event/T814Number.jpeg':Output file #0 does not contain any stream
ffmpegPreviewImage - station: T8010P2321053A27 device: T8140P6121140EE0 - Error [{}]
To Reproduce
Steps to reproduce the behavior:
- Go to Logs
- Wait for motion detection for Eufy Camers
- See error messages
Expected behavior
A clear and concise description of what you expected to happen.
There should be no errors.
Versions:
Versions:
Adapter version: <0.7.1>
JS-Controller version: <v5.1.25> : v5.1.25
Node version: <v14.18.1> : v14.18.1
Operating system: <Linux raspberrypi 5.10.63-v7l+>
ffmpeg version 4.1.6-1~deb10u1+rpt2 Copyright (c) 2000-2020 the FFmpeg developers built with gcc 8 (Raspbian 8.3.0-6+rpi1)
Hope that this is the last error I'm struggling with.
Thank you, Zbigniew
Hello, Any clue what might be wrong ? I saw similar issues in some communities, unfortunately without any solution :(
Thank you, Zbigniew
Hi @zbigniewbednarek,
it could be a BUG. Must check this functionality again.
I set the recording time of the camera to 28s and then the error was no longer in the LOG for one day, but the error was in the LOG again the next day, could it be that it has something to do with the recording time?
Adapter Version 0.7.4
Ive set the Recording Time to 0 sek. The Bug stays. Maybe we have to upgrade FFmpeg?
the message no longer comes if the messages in the Eufy app are switched off when there is movement. The image is then accessed via this link and no error messages appear in the Iobroker log
https://zhixin-security-eu.s3.eu-central-1.amazonaws.com/thumb/2021/12/29/station/
if the image can be retrieved in this way:
https: //security-app-eu.eufylife.com .........
the error messages come back in the Iobroker LOG
I solved it like this, unfortunately the link in the telegram is very large
@locito09 What do you mean by "switching off messages in the Eufy app" ? Are you speaking about disabling motion Detection or what ? Let me know
Thanks!
I've disabled the notification for motion detection, but I'm getting this error when somebody is ringing the doorbell. And I can't turn off the notification for that. So any ideas why this only happens with enabled notifications?
Because when the adapter receives a push notification containing information about the video of the event, it attempts to download it. In the second step, a screenshot is generated from the downloaded video. In this case there is an error in the second step. I can only find out why this error occurs by obtaining a complete debug log.
FYI: In the next version, there will also be an option to disable the download of the video + generation of the screenshot when receiving a push notification.
@bropat I can provide you with "debug" logs .. just let me know how to set the to debug.
here is a log
`
| eufy-security.0 | 2022-01-21 10:38:11.249 | debug | [PushClient.handleHeartbeatAck] Heartbeat acknowledge [{"tag":1,"object":{"lastStreamIdReceived":12}}] |
|---|---|---|---|
| eufy-security.0 | 2022-01-21 10:38:11.231 | debug | [PushClient.buildHeartbeatPingRequest] heartbeatPingRequest [{"last_stream_id_received":13}] |
| eufy-security.0 | 2022-01-21 10:38:11.231 | debug | [PushClient.sendHeartbeat] Sending heartbeat... [13] |
| eufy-security.0 | 2022-01-21 10:36:53.927 | error | ffmpegPreviewImage - station: T8010P2320491CC6 device: T8210P00204911BC - Error [{}] |
| eufy-security.0 | 2022-01-21 10:36:53.927 | error | ffmpegPreviewImage(): ffmpeg stderr:ffmpeg version 4.4.1-static https://johnvansickle.com/ffmpeg/ Copyright (c) 2000-2021 the FFmpeg developers built with gcc 8 (Debian 8.3.0-6) configuration: --enable-gpl --enable-version3 --enable-static --disable-debug --disable-ffplay --disable-indev=sndio --disable-outdev=sndio --cc=gcc --enable-fontconfig --enable-frei0r --enable-gnutls --enable-gmp --enable-libgme --enable-gray --enable-libaom --enable-libfribidi --enable-libass --enable-libvmaf --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librubberband --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libvorbis --enable-libopus --enable-libtheora --enable-libvidstab --enable-libvo-amrwbenc --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libdav1d --enable-libxvid --enable-libzvbi --enable-libzimg libavutil 56. 70.100 / 56. 70.100 libavcodec 58.134.100 / 58.134.100 libavformat 58. 76.100 / 58. 76.100 libavdevice 58. 13.100 / 58. 13.100 libavfilter 7.110.100 / 7.110.100 libswscale 5. 9.100 / 5. 9.100 libswresample 3. 9.100 / 3. 9.100 libpostproc 55. 9.100 / 55. 9.100[hls @ 0x7282c80] Skip ('#EXT-X-VERSION:3')[hls @ 0x7282c80] Cannot get correct #EXTINF value of segment /opt/iobroker/iobroker-data/eufy-security.0/T8010P2320491CC6/last_event/T8210P00204911BC0.ts, set to default value to 1ms.[hls @ 0x7282c80] Opening '/opt/iobroker/iobroker-data/eufy-security.0/T8010P2320491CC6/last_event/T8210P00204911BC0.ts' for reading[aac @ 0x7290380] Sample rate index in program config element does not match the sample rate index configured by the container.[aac @ 0x7290380] Reserved bit set.[aac @ 0x7290380] Number of bands (5) exceeds limit (2).[aac @ 0x7290380] Dependent coupling is not supported together with LTP Last message repeated 1 times[aac @ 0x7290380] Multiple frames in a packet.[aac @ 0x7290380] Reserved bit set.[aac @ 0x7290380] Number of bands (12) exceeds limit (9).[aac @ 0x7290380] channel element 3.1 is not allocated[aac @ 0x7290380] Sample rate index in program config element does not match the sample rate index configured by the container.[aac @ 0x7290380] Inconsistent channel configuration.[aac @ 0x7290380] get_buffer() failed[aac @ 0x7290380] More than one AAC RDB per ADTS frame is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.[aac @ 0x7290380] Sample rate index in program config element does not match the sample rate index configured by the container.[aac @ 0x7290380] Inconsistent channel configuration.[aac @ 0x7290380] get_buffer() failed[aac @ 0x7290380] Reserved bit set.[aac @ 0x7290380] invalid band type[hls @ 0x7282c80] decoding for stream 1 failed[hls @ 0x7282c80] Could not find codec parameters for stream 0 (Video: h264 ([27][0][0][0] / 0x001B), none): unspecified sizeConsider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) options[hls @ 0x7282c80] Could not find codec parameters for stream 1 (Audio: aac (LTP) ([15][0][0][0] / 0x000F), stereo, fltp): unspecified sample rateConsider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) optionsInput #0, hls, from '/opt/iobroker/iobroker-data/eufy-security.0/T8010P2320491CC6/last_event/T8210P00204911BC.m3u8': Duration: 00:00:00.00, start: 1.400000, bitrate: 1232 kb/s Program 0 Metadata: variant_bitrate : 0 Stream #0:0: Video: h264 ([27][0][0][0] / 0x001B), none, 90k tbr, 90k tbn, 180k tbc Metadata: variant_bitrate : 0 Stream #0:1: Audio: aac (LTP) ([15][0][0][0] / 0x000F), stereo, fltp Metadata: variant_bitrate : 0Output #0, image2, to '/opt/iobroker/iobroker-data/eufy-security.0/T8010P2320491CC6/last_event/T8210P00204911BC.jpeg':Output file #0 does not contain any stream |
| eufy-security.0 | 2022-01-21 10:36:53.926 | error | ffmpegPreviewImage(): ffmpeg output: |
| eufy-security.0 | 2022-01-21 10:36:53.926 | error | ffmpegPreviewImage(): An error occurred: ffmpeg exited with code 1: Output #0, image2, to '/opt/iobroker/iobroker-data/eufy-security.0/T8010P2320491CC6/last_event/T8210P00204911BC.jpeg':Output file #0 does not contain any stream |
| eufy-security.0 | 2022-01-21 10:36:53.904 | debug | [EufySecurity.onStateChange] state eufy-security.0.T8010P2320491CC6.cameras.T8210P00204911BC.last_event_video_url changed: /eufy-security.0/T8010P2320491CC6/last_event/T8210P00204911BC.m3u8 (ack = true) was already acknowledged, ignore it... |
| eufy-security.0 | 2022-01-21 10:36:53.874 | debug | [FfmpegCommand] ffmpegStreamToHls(): Processing finished! |
| eufy-security.0 | 2022-01-21 10:36:53.859 | debug | [P2PClientProtocol.handleMsg] Station T8010P2320491CC6 - DATA CONTROL - Received expected sequence (seqNo: 11 queuedData.size: 0) |
| eufy-security.0 | 2022-01-21 10:36:53.857 | debug | [P2PClientProtocol.handleDataControl] Station T8010P2320491CC6 - CMD_DOWNLOAD_FINISH [{"channel":0}] |
| eufy-security.0 | 2022-01-21 10:36:53.856 | debug | [P2PClientProtocol.parseDataMessage] Station T8010P2320491CC6 - Received data [{"seqNo":11,"header":{"commandId":1304,"bytesToRead":0,"channel":0,"signCode":0,"type":0},"bytesRead":0,"bytesToRead":0,"firstPartMessage":true,"messageSize":16}] |
| eufy-security.0 | 2022-01-21 10:36:53.856 | debug | [P2PClientProtocol.handleMsg] Station T8010P2320491CC6 - DATA CONTROL - received from host 192.168.188.125:12147 - Processing sequence 11... |
| eufy-security.0 | 2022-01-21 10:36:51.951 | debug | [P2PClientProtocol.handleMsg] Station T8010P2320491CC6 - DATA BINARY - Received expected sequence (seqNo: 2283 queuedData.size: 0) |
| eufy-security.0 | 2022-01-21 10:36:51.951 | debug | [P2PClientProtocol.parseDataMessage] Station T8010P2320491CC6 - Received data [{"seqNo":2283,"header":{"commandId":1301,"bytesToRead":191,"channel":0,"signCode":0,"type":0},"bytesRead":191,"bytesToRead":191,"firstPartMessage":true,"messageSize":733}] |
| eufy-security.0 | 2022-01-21 10:36:51.950 | debug | [P2PClientProtocol.handleDataBinaryAndVideo] Station T8010P2320491CC6 - CMD_VIDEO_FRAME [{"dataSize":6942,"metadata":{"streamType":2,"videoSeqNo":147,"videoFPS":15,"videoWidth":2560,"videoHeight":1920,"videoTimestamp":1642761399212,"videoDataLength":6917,"aesKey":""},"videoDataSize":6917}] |
| eufy-security.0 | 2022-01-21 10:36:51.950 | debug | [P2PClientProtocol.handleMsg] Station T8010P2320491CC6 - DATA BINARY - received from host 192.168.188.125:12147 - Processing sequence 2283... |
| eufy-security.0 | 2022-01-21 10:36:51.951 | debug | [P2PClientProtocol.handleDataBinaryAndVideo] Station T8010P2320491CC6 - CMD_AUDIO_FRAME [{"dataSize":191,"metadata":{"audioType":0,"audioSeqNo":157,"audioTimestamp":1642761399245,"audioDataLength":175},"audioDataSize":175}] |
| eufy-security.0 | 2022-01-21 10:36:51.949 | debug | [P2PClientProtocol.handleMsg] Station T8010P2320491CC6 - DATA BINARY - Received expected sequence (seqNo: 2282 queuedData.size: 0) |
| eufy-security.0 | 2022-01-21 10:36:51.950 | debug | [P2PClientProtocol.parseDataMessage] Station T8010P2320491CC6 - Received data [{"seqNo":2283,"header":{"commandId":1300,"bytesToRead":6942,"channel":0,"signCode":0,"type":0},"bytesRead":6942,"bytesToRead":6942,"firstPartMessage":false,"messageSize":733}] |
| eufy-security.0 | 2022-01-21 10:36:51.949 | debug | [P2PClientProtocol.parseDataMessage] Station T8010P2320491CC6 - Received data [{"seqNo":2282,"header":{"commandId":1300,"bytesToRead":6942,"channel":0,"signCode":0,"type":0},"bytesRead":6416,"bytesToRead":6942,"firstPartMessage":false,"messageSize":1024}] |
| eufy-security.0 | 2022-01-21 10:36:51.949 | debug | [P2PClientProtocol.handleMsg] Station T8010P2320491CC6 - DATA BINARY - received from host 192.168.188.125:12147 - Processing sequence 2282... |
| eufy-security.0 | 2022-01-21 10:36:51.948 | debug | [P2PClientProtocol.handleMsg] Station T8010P2320491CC6 - DATA BINARY - Received expected sequence (seqNo: 2281 queuedData.size: 0) |
| eufy-security.0 | 2022-01-21 10:36:51.948 | debug | [P2PClientProtocol.parseDataMessage] Station T8010P2320491CC6 - Received data [{"seqNo":2281,"header":{"commandId":1300,"bytesToRead":6942,"channel":0,"signCode":0,"type":0},"bytesRead":5392,"bytesToRead":6942,"firstPartMessage":false,"messageSize":1024}] |
| eufy-security.0 | 2022-01-21 10:36:51.948 | debug | [P2PClientProtocol.handleMsg] Station T8010P2320491CC6 - DATA BINARY - received from host 192.168.188.125:12147 - Processing sequence 2281... |
| eufy-security.0 | 2022-01-21 10:36:51.947 | debug | [P2PClientProtocol.handleMsg] Station T8010P2320491CC6 - DATA BINARY - Received expected sequence (seqNo: 2280 queuedData.size: 0) |
| eufy-security.0 | 2022-01-21 10:36:51.947 | debug | [P2PClientProtocol.parseDataMessage] Station T8010P2320491CC6 - Received data [{"seqNo":2280,"header":{"commandId":1300,"bytesToRead":6942,"channel":0,"signCode":0,"type":0},"bytesRead":4368,"bytesToRead":6942,"firstPartMessage":false,"messageSize":1024}] |
| eufy-security.0 | 2022-01-21 10:36:51.946 | debug | [P2PClientProtocol.handleMsg] Station T8010P2320491CC6 - DATA BINARY - received from host 192.168.188.125:12147 - Processing sequence 2280... |
| eufy-security.0 | 2022-01-21 10:36:51.940 | debug | [P2PClientProtocol.handleMsg] Station T8010P2320491CC6 - DATA BINARY - Received expected sequence (seqNo: 2279 queuedData.size: 0) |
| eufy-security.0 | 2022-01-21 10:36:51.940 | debug | [P2PClientProtocol.parseDataMessage] Station T8010P2320491CC6 - Received data [{"seqNo":2279,"header":{"commandId":1300,"bytesToRead":6942,"channel":0,"signCode":0,"type":0},"bytesRead":3344,"bytesToRead":6942,"firstPartMessage":false,"messageSize":1024}] |
| eufy-security.0 | 2022-01-21 10:36:51.939 | debug | [P2PClientProtocol.handleMsg] Station T8010P2320491CC6 - DATA BINARY - Received expected sequence (seqNo: 2278 queuedData.size: 0) |
`
@bropat Thank you for adding option for Automatic video download. Let me check :)
I think I have the same error.
Versions: Adapter version: v0.9.4 Node.js: v16.16.0 NPM: v8.11.0
Downloading work, but on ffmpegPreviewImage I get an error: 16:40:17.021 debug [P2PClientProtocol.handleDataControl] Station DEVICENAME - CMD_DOWNLOAD_FINISH [{"channel":0}] 16:40:17.021 debug [P2PClientProtocol.handleMsg] Station DEVICENAME - DATA CONTROL - Received expected sequence (seqNo: 3 queuedData.size: 0) 16:40:17.034 debug [FfmpegCommand] ffmpegStreamToHls(): Processing finished! 16:40:17.045 silly States user redis pmessage eusec.0.DEVICENAME.*/eusec.0.DEVICENAME.cameras.DEVICENAME.last_event_video_url:{"val":"/eusec.0/DEVICENAME/last_event/DEVICENAME.m3u8","ack":true,"ts":1662388817044,"q":0,"from":"system.adapter.eusec.0","user":"system.user.admin","lc":1662388218723}
16:40:17.050 debug [euSec.onStateChange] state eusec.0.DEVICENAME.cameras.DEVICENAME.last_event_video_url changed: /eusec.0/DEVICENAME/last_event/DEVICENAME.m3u8 (ack = true) was already acknowledged, ignore it...
16:40:17.063 error ffmpegPreviewImage(): An error occurred: ffmpeg exited with code 1: Output #0, image2, to '/opt/iobroker/iobroker-data/eusec.0/DEVICENAME/last_event/DEVICENAME.jpeg':Output file #0 does not contain any stream
16:40:17.063 error ffmpegPreviewImage(): ffmpeg output: 16:40:17.063 error ffmpegPreviewImage(): ffmpeg stderr:ffmpeg version 4.4.1-static https://johnvansickle.com/ffmpeg/ Copyright (c) 2000-2021 the FFmpeg developers built with gcc 8 (Debian 8.3.0-6) configuration: --enable-gpl --enable-version3 --enable-static --disable-debug --disable-ffplay --disable-indev=sndio --disable-outdev=sndio --cc=gcc --enable-fontconfig --enable-frei0r --enable-gnutls --enable-gmp --enable-libgme --enable-gray --enable-libaom --enable-libfribidi --enable-libass --enable-libvmaf --enable-libfreetype --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-librubberband --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libvorbis --enable-libopus --enable-libtheora --enable-libvidstab --enable-libvo-amrwbenc --enable-libvpx --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxml2 --enable-libdav1d --enable-libxvid --enable-libzvbi --enable-libzimg libavutil 56. 70.100 / 56. 70.100 libavcodec 58.134.100 / 58.134.100 libavformat 58. 76.100 / 58. 76.100 libavdevice 58. 13.100 / 58. 13.100 libavfilter 7.110.100 / 7.110.100 libswscale 5. 9.100 / 5. 9.100 libswresample 3. 9.100 / 3. 9.100 libpostproc 55. 9.100 / 55. 9.100[hls @ 0x6716880] Skip ('#EXT-X-VERSION:3')[hls @ 0x6716880] Cannot get correct #EXTINF value of segment /opt/iobroker/iobroker-data/eusec.0/DEVICENAME/last_event/DEVICENAME0.ts, set to default value to 1ms.[hls @ 0x6716880] Opening '/opt/iobroker/iobroker-data/eusec.0/DEVICENAME/last_event/DEVICENAME0.ts' for reading[aac @ 0x67249c0] More than one AAC RDB per ADTS frame is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented.[aac @ 0x67249c0] Assuming an incorrectly encoded 7.1 channel layout instead of a spec-compliant 7.1(wide) layout, use -strict 1 to decode according to the specification instead.[aac @ 0x67249c0] channel element 3.11 is not allocated[aac @ 0x67249c0] channel element 3.15 is not allocated[hls @ 0x6716880] decoding for stream 1 failed[hls @ 0x6716880] Could not find codec parameters for stream 0 (Video: h264 ([27][0][0][0] / 0x001B), none): unspecified sizeConsider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) options[hls @ 0x6716880] Could not find codec parameters for stream 1 (Audio: aac (SSR) ([15][0][0][0] / 0x000F), 7.1, fltp): unspecified sample rateConsider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) optionsInput #0, hls, from '/opt/iobroker/iobroker-data/eusec.0/DEVICENAME/last_event/DEVICENAME.m3u8': Duration: 00:00:00.00, start: 1.400000, bitrate: 1232 kb/s Program 0 Metadata: variant_bitrate : 0 Stream #0:0: Video: h264 ([27][0][0][0] / 0x001B), none, 90k tbr, 90k tbn, 180k tbc Metadata: variant_bitrate : 0 Stream #0:1: Audio: aac (SSR) ([15][0][0][0] / 0x000F), 7.1, fltp Metadata: variant_bitrate : 0Output #0, image2, to '/opt/iobroker/iobroker-data/eusec.0/DEVICENAME/last_event/DEVICENAME.jpeg':Output file #0 does not contain any stream 16:40:17.063 error ffmpegPreviewImage - station: DEVICENAME device: DEVICENAME - Error [{}]
In what format is the video saved and ist the path "/opt/iobroker/iobroker-data/eusec.0/DEVICENAME/last_event" correct? I think the m3u8 file is too small for a video. 55836 DEVICENAME0.ts 154 DEVICENAME.m3u8 39320 DEVICENAME0.jpeg
Thank you in advance!
