Newest firmware break vehicle commands?

[williamd314]

I've added the integration, I can read all of the sensors and points that are passed through the API to HA. However, I've been trying to pair my car with HA using a bluetooth proxy, and cannot get it to pair. Verified the BT proxy is scanning.

I have 2024.19.04 installed in my R1S Dual Motor (large pack).

Viewing the logs on the BT proxy device, I tap "Press" for the "Pair" command, and get this in the logs:

[12:47:25][I][bluetooth_proxy:282]: [0] [40:F3:B0:78:02:61] Connecting v3 without cache [12:47:25][D][esp32_ble_tracker:219]: Pausing scan to make connection... [12:47:25][I][esp32_ble_client:067]: [0] [40:F3:B0:78:02:61] 0x00 Attempting BLE connection [12:47:34][D][esp-idf:000][BTU_TASK]: W (77387840) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x3e [12:47:35][I][esp32_ble_client:084]: [0] [40:F3:B0:78:02:61] Disconnecting. [12:47:55][D][esp-idf:000][BTU_TASK]: W (77408845) BT_APPL: gattc_conn_cb: if=3 st=0 id=3 rsn=0x100 [12:47:55][D][esp-idf:000][BTU_TASK]: W (77408848) BT_APPL: gattc_conn_cb: if=4 st=0 id=4 rsn=0x100 [12:47:55][D][esp-idf:000][BTU_TASK]: W (77408851) BT_APPL: gattc_conn_cb: if=5 st=0 id=5 rsn=0x100 [12:47:55][D][esp32_ble_client:172]: [0] [40:F3:B0:78:02:61] ESP_GATTC_DISCONNECT_EVT, reason 256 [12:47:55][D][esp32_ble_tracker:270]: Starting scan...

I take this to mean the pair is using the Bluetooth Proxy to attempt a connection. However, when sitting in the car, I tap "Setup" for the Phone Key showing from my HA (it shows as simply "Home"), and then tap "Press" to pair, but it never makes the connection.

Features that should be vehicle commands like "Wake" and "Windows" (venting), it shows as Unavailable.