bramstroker
update TRETAKT standby_power
Small change in TRETAKT device values. Change from 0.13. measured two times average over 300 sec with Shelly smart plug s. off consumption was 0.15 and 0.16.
The deviation is so small I prefer to keep with the Zhurui PR10 measurements. As I also have both Shelly Plug S and Zhurui PR10, and the latter is better and more precise in sub 0.5W measurements. Surprised you where even able to measure anything <0.2W with the Shelly Plug S. Which version / gen do you have?
I had an additional load connected of about 1W and used the script to measure the average two times for 300sec. 0.13W is lower than I've ever seen, so after measuring myself I thought it should be at least 0.15W. However the difference is small indeed, and I can't back it up with more accurate measurement equipment. It's probably fine either way.