Andrew

No way, v3 are identical, v1 v2 are different. You need to flash exactly what is on the label. The one wire difference (lucky you did not brick it) can...

Can you check interop against supported release? If old release can be adapted fine, but if not it cannot be fixed. Cmon 16MB flash is still plenty, you need to...

The utmost priority is to flash right release for the hardware on your router. you can handle wpad replacement via firmware selector or run auc (a minuscule package composing image...

Standard behaviour is like that, just that modern router has 2 radios to tune settings so that your phone is not disconnecting repeatedly in place of just connecting to better...

Android 9 needs to reassociate to network if FT gets enabled and cannot have FT and no-FT APs in the mash. Try various "conservative mode" options in android developer menu...

Ref: https://github.com/openwrt/packages/issues/23706

"certain packet" kind of demands pcap. Please be more specific - is it wifi port in br-lan, br-lan or the hardware switch without relation to wifi?

ld_preload is always cleared changing uid

Please attach `/etc/config/wireless` and is it 2 ax53u or 2 different devices?

Note that it is not analog amplifier, it is protocol repeater.