Andrea Bondavalli
Andrea Bondavalli
> > Which device do you use to get AES67 sound at 96khz ??? Two deamons on two different boards or via loopback test (platform test)
> What could be added for Dante environments is the PTP/audio Qos tag value option for 56/46 (Dante) alongside of 48/34 (Ravenna) Thanks for your message. The daemon and the...
I have tested the Ravenna implementation in the daemon with the Merging Butler and with the Hasseb audio receiver. Did you compile the daemon with Linux Avahi support enabled ?...
First of all you need to have a PTP master clock running on the LAN. Use the WebUI on both devices and make sure that the PTP status in the...
HI there, by default you cannot run the master clock on the same board where you run the AES67 daemon, and you have to run ptp4l on a third board....
Try to check if multicast mode is enabled, see also: > Yamaha MY16-2 does not seem to acccept connections from AES67 source. > Icons stay at "prohibited" state, RTP Subscription...
I have just tried and it works for me. On the daemon side select _TIC frame size @1FS (samples)_ to _48 - 1ms_
hmm strange, everything seems ok. regarding: > speaker-test -D plughw:RAVENNA -r 48000 -c 2 -t sine > I note that the output is declaring 16 bit but the Hasseb supports...
> No, this is correct. You can try to sniff the session with Wireshark or use another device.
Hey thanks for finding this. Could you identify what exactly in the SDP file is causing the issue ? > the only problem is that stopping play there is a...