HX711
HX711 copied to clipboard
bogde
Creep effect removal. Load cell storage over long time
Hello, I am designing a load cell monitored storage. Where I can keep something for months to monitor the weight just like beehive monitor projects. I am facing the creep effect after reading the common error document. I have checked any wire r other issues everything is in place. Even I have used a 30Kg loadcell setup from a market product already. Just added HX711 with 4 wires.
My result is increasing over time by around 2 grams per 12-15 minutes.
Is there a way to compensate for this error in code?
Dear @dev-techshlok, dear community,
on this topic, I would like to point out the More on load cell temperature compensation discussion on the Hiveeyes forum, where @hsors shared his story of improving stability by researching into temperature compensation. Just recently, he added a corresponding implementation. Big kudos and thanks a stack, Henri!
With kind regards, Andreas.
/cc @msweef, @ClemensGruber, @MKO1640
Thanks Andreas ! -Henri
On Thu, 2 Jun 2022 at 13:03, Andreas Motl @.***> wrote:
Dear @dev-techshlok https://github.com/dev-techshlok, dear community,
on this topic, I would like to point out the More on load cell temperature compensation https://community.hiveeyes.org/t/more-on-load-cell-temperature-compensation/4391 discussion on the Hiveeyes forum, where @hsors https://github.com/hsors shared his story of improving stability by researching into temperature compensation. Just recently, he added a corresponding implementation. Big kudos and thanks a stack, Henri!
With kind regards, Andreas.
— Reply to this email directly, view it on GitHub https://github.com/bogde/HX711/issues/236#issuecomment-1144731749, or unsubscribe https://github.com/notifications/unsubscribe-auth/AJSZCCGREARY3QH6EALOYMLVNCIGVANCNFSM5UCGWHHA . You are receiving this because you were mentioned.Message ID: @.***>
-- Henri SORS .
