bobvc133

> I know. It is fixed in 2.4.8 release just now. Another problem is that the screen is flipped vertically. TTGO T-DISPLAY is normal. Development boards such as esp32doit-devkit-v1 are...

> I know. It is fixed in 2.4.8 release just now. 2.4.8 The boot screen seems to be gone

> @rigr > > 1. Boot screen has been disabled to save memory. Uncomment the code in DisplayTFT.h to re-enable it. > 2. The default value is changed. To flip...

> Ok, success to get accesspoint mode: after start immediately press pedal7 and release in the right moment. IT's a bitte too fast, 8 seconds between the steps would be...

 I added two more KY-040s to the pedals, the switch and the resistance ladder are connected, and the Jog Wheel is connected to A3, D3, A4, D4, they are...

> For the moment you can use a workaround to fix the jog wheel: add at least one action to bank 0. I added easing in BANK 0, KY-040 still...

Yes, if you often need to modify the code to customize the settings, then it is meaningless to update the firmware through the browser, backup and restore the configuration file...

> > That's beautiful! > > Regarding your LED issue, I can't say for certain, but having worked with pixel strip before, I know the colors are not always addressed...

> Thanks @bobvc133 for the suggestion. I will try to add as much as possible every configuration parameters in the web interface with the next major release. Another planned improvement...

I tested and found that when GPIO23 is mapped as the BOOT button, and the power on/off function is set, it can be powered off but cannot be powered on