exit status 1 Compilation error: exit status 1 (ESP32)

[Adelll1]

Whenever I apply this code or any blynk app code on my esp32 it shows: "exit status 1 Compilation error: exit status 1" with no any other details and i checked all the libraries and here is the code : /*************************************************************

This is a simple demo of sending and receiving some data. Be sure to check out other examples! *************************************************************/

/* Fill-in information from Blynk Device Info here */ #define BLYNK_TEMPLATE_ID "TMPLlPKJM_JT" #define BLYNK_TEMPLATE_NAME "Quickstart Device" #define BLYNK_AUTH_TOKEN "-3cEKJxQqbD6w1ZLB4ud_v4Ns2noffQL"

/* Comment this out to disable prints and save space */ #define BLYNK_PRINT Serial

#include <WiFi.h> #include <WiFiClient.h> #include <BlynkSimpleEsp32.h>

// Your WiFi credentials. // Set password to "" for open networks. char ssid[] = "YourNetworkName"; char pass[] = "YourPassword";

BlynkTimer timer;

// This function is called every time the Virtual Pin 0 state changes BLYNK_WRITE(V0) { // Set incoming value from pin V0 to a variable int value = param.asInt();

// Update state Blynk.virtualWrite(V1, value); }

// This function is called every time the device is connected to the Blynk.Cloud BLYNK_CONNECTED() { // Change Web Link Button message to "Congratulations!" Blynk.setProperty(V3, "offImageUrl", "https://static-image.nyc3.cdn.digitaloceanspaces.com/general/fte/congratulations.png"); Blynk.setProperty(V3, "onImageUrl", "https://static-image.nyc3.cdn.digitaloceanspaces.com/general/fte/congratulations_pressed.png"); Blynk.setProperty(V3, "url", "https://docs.blynk.io/en/getting-started/what-do-i-need-to-blynk/how-quickstart-device-was-made"); }

// This function sends Arduino's uptime every second to Virtual Pin 2. void myTimerEvent() { // You can send any value at any time. // Please don't send more that 10 values per second. Blynk.virtualWrite(V2, millis() / 1000); }

void setup() { // Debug console Serial.begin(115200);

Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass); // You can also specify server: //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, "blynk.cloud", 80); //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, IPAddress(192,168,1,100), 8080);

// Setup a function to be called every second timer.setInterval(1000L, myTimerEvent); }

void loop() { Blynk.run(); timer.run(); // You can inject your own code or combine it with other sketches. // Check other examples on how to communicate with Blynk. Remember // to avoid delay() function! }

[cent0]

the code is only example char ssid[] = "YourNetworkName"; COMPILE char pass[] = "YourPassword"; COMPILE

no member reply ?