例子程序 example_miot_light.ts 小爱报错：要操作的设备好像出问题了

[harpyham]

运行例子程序 example_miot_light.ts 用小爱控制 打开设备，小爱报错：要操作的设备好像出问题了，等一会再试吧。

日志：

#ts-node -i example/miot/example_miot_light.ts 
{
  detail: {
    broker: 'blinker',
    deviceName: 'C008B9391EK2D08KDKTY1HFZ',
    host: 'mqtts://broker.diandeng.tech',
    iotId: 'ARQNLBMswFFoNRyMA5V95rQXkE',
    iotToken: 'Ro8TMzRLUp7vJMyLAJCFhKMoGLgWbyUR',
    port: '1884',
    productKey: 'blinker',
    uuid: '41450bfca16d11edb9025254'
  },
  message: 1000
}
 mqtt  broker:blinker
 mqtt  blinker connected
{"fromDevice":"ServerSender","data":{"get":"state","from":"MIOT","messageId":"63db698437b86208"}}
 MIOT>device  {"get":"state","from":"MIOT","messageId":"63db698437b86208"}
ServerSender MIOT
{"fromDevice":"ServerSender","data":{"set":{"pState":"true","pstate":"on"},"from":"MIOT","messageId":"63db698537b8620a"}}
 MIOT>device  {"set":{"pState":"true","pstate":"on"},"from":"MIOT","messageId":"63db698537b8620a"}
ServerSender MIOT

[vicat47]

一样的问题

[tsvico]

+1，能接收到小爱的指令消息，但是总是报要出问题了 感觉是反馈的代码有问题 https://diandeng.tech/doc/xiaoai#:~:text=%E6%99%BA%E8%83%BD%E9%9F%B3%E7%AE%B1%E6%8E%A5%E5%8F%A3%2C%20%E5%8F%8D%E9%A6%88%E6%95%B0%E6%8D%AE%E5%88%B0%E5%B0%8F%E7%88%B1%E5%90%8C%E5%AD%A6%0A%3D%3D%E4%BB%BB%E4%BD%95%E6%8E%A7%E5%88%B6%E5%8A%A1%E5%BF%85%E5%8D%B3%E6%97%B6%E5%8F%8D%E9%A6%88%3D%3D%0A%3D%3D%E8%B6%85%E6%97%B62s%E4%BB%A5%E4%B8%8A%E5%86%8D%E5%8F%8D%E9%A6%88%EF%BC%8C%E5%B0%8F%E7%88%B1%E5%90%8C%E5%AD%A6%E5%B0%B1%E9%BB%98%E8%AE%A4%E8%AE%BE%E5%A4%87%E4%B8%8D%E5%9C%A8%E7%BA%BF%EF%BC%8C%E5%B0%8F%E7%88%B1%E5%90%8C%E5%AD%A6%E4%BC%9A%E5%8F%8D%E9%A6%88%E2%80%9C%E6%99%BA%E8%83%BD%E5%AE%B6%E5%B1%85%E6%8E%A7%E5%88%B6%E5%87%BA%E4%BA%86%E7%82%B9%E9%97%AE%E9%A2%98%E2%80%9D%3D%3D

[vicat47]

+1，能接收到小爱的指令消息，但是总是报要出问题了 感觉是反馈的代码有问题 https://diandeng.tech/doc/xiaoai#:~:text=%E6%99%BA%E8%83%BD%E9%9F%B3%E7%AE%B1%E6%8E%A5%E5%8F%A3%2C%20%E5%8F%8D%E9%A6%88%E6%95%B0%E6%8D%AE%E5%88%B0%E5%B0%8F%E7%88%B1%E5%90%8C%E5%AD%A6%0A%3D%3D%E4%BB%BB%E4%BD%95%E6%8E%A7%E5%88%B6%E5%8A%A1%E5%BF%85%E5%8D%B3%E6%97%B6%E5%8F%8D%E9%A6%88%3D%3D%0A%3D%3D%E8%B6%85%E6%97%B62s%E4%BB%A5%E4%B8%8A%E5%86%8D%E5%8F%8D%E9%A6%88%EF%BC%8C%E5%B0%8F%E7%88%B1%E5%90%8C%E5%AD%A6%E5%B0%B1%E9%BB%98%E8%AE%A4%E8%AE%BE%E5%A4%87%E4%B8%8D%E5%9C%A8%E7%BA%BF%EF%BC%8C%E5%B0%8F%E7%88%B1%E5%90%8C%E5%AD%A6%E4%BC%9A%E5%8F%8D%E9%A6%88%E2%80%9C%E6%99%BA%E8%83%BD%E5%AE%B6%E5%B1%85%E6%8E%A7%E5%88%B6%E5%87%BA%E4%BA%86%E7%82%B9%E9%97%AE%E9%A2%98%E2%80%9D%3D%3D

这些接口应该是过时了，可以自己研究重写下吧，我这边切到 node-red 上了。具体可以参考下这个项目 https://gitee.com/suwillT_T/node-red-contrib-blinker-mqtt