zigbee

zigbee copied to clipboard

The zigbee devices from eglo are named -Z, i.e. TURCONA-Z. As far as I know, TURCONA-C is not a zigbee device.

martin3000

It's possible this could be a home assistant issue as I haven't confirmed directly, but it seems unlikely. I have half a dozen or so of these dimmers and none...

ceuk

Removed ZHA

3

Confirmed it doesn't work with ZHA

robinlennox

Update URLs

1

I updated a few other URLs too now.

wrt54g

Request: Add nymea as gateway software

1

nymea (https://nymea.io/users) is a FOSS smart home/IoT platform with good ZigBee support. Would be nice to see it on the list of gateways. Currently supported ZigBee adapters: * All phoscon...

mzanetti

Confirmed working: Circuit Breaker DIN 16A - ATMS1602Z

1

Hi I can confirm what the following device works without problem with ZHA integration in Home Assistant. Power, total consumption, voltage and current (with Powerfactor) are shown. Device also has...

Sesshoumaru-sama

Update Tuya_TS011F.md

1

_TZ3000_ko6v90pg

DavidFFerreira

Multiple Versions of Lidl Livarno Light Bar

1

Hi, I've recently bought a Livarno Light Bar from the [Lidl Online Shop](https://www.lidl.de/p/livarno-home-lichtleiste-mit-lichtfarbensteuerung-rgb-led-zigbee-smart-home/p100339565), which seems to be a different version than [this](https://zigbee.blakadder.com/Lidl_14149506L.html) supported model. Unfortunately I'm having the same issue...

steffen890

In https://github.com/blakadder/zigbee/blob/master/_zigbee/Ebyte_E18-MS1PA2-IPX.md this device is mentioned to work but [a discussion on the firmware page ](https://github.com/Koenkk/Z-Stack-firmware/issues/200)suggests that due to twisted pins (P11 is TXEN and P10 is RXEN) it actually...

Kugeleis

Frient Air Quality Sensor doesn't work with ZHA

11

See https://github.com/home-assistant/core/issues/49127

flepied