templates
templates copied to clipboard
blakadder
Tasmota Device Templates Repository. Your one stop shop to get templates for devices running Tasmota!
Topgreener replaced TGWF115PQM with new insides, completely different chip :(
it just works TM with a simple 28 awg short cable from the pad to the serial ground pad.
This is now available on amazon as Home Zone. The Blitzwolf models have been sold out for some time
The template for [wi-fi dimmer switch](https://github.com/blakadder/templates/blob/master/_templates/wifi_dimmer_switch) seems to be wrong. After it is applied, the physical buttons work but tasmota can't control the Relay or the dimmer level.  Also,...
https://github.com/blakadder/templates/blob/5a3a480cadec8f76bde004ef5a96f6803765ee26/_templates/arlec_SGS01HA#L101 "value" should be "sensorValue" for both references of the variable in this line.
For some time now i get this in my logs Template warning: 'int' got invalid input 'unknown' when rendering template '{% if value_json.TuyaReceived is defined and value_json['TuyaReceived'].DpType2Id107 is defined %}...
Hey, After disassembling my Arlec Smart Security Sensor Light (MAL300HA) some while back and being unable to reverse-engineer the Manual Override function, I have found your template is the same,...
"To avoid interferences from the MCU, bridge RST to GND on the MCU too." how to disable the mcu is not actually stated. where is this chip? is it under...
