Brian K. White

I removed the RUN action from the udev rules and re-plugged the receiver, and udev is not spamming syslog, it just reacted to the plug event, set the permissions, and...

Not a random scattering. Repeated re-running of the same -a 888800 command always leaves the same set of keys dark: left-shift, F1-F5, Home, End, PgUp, Pg Dn, all 4 arrow...

When I run `g915-led -p /etc/g810-led/profile` manually (it's removed from udev now remember), the profile is applied and all key are set according to that profile, but 60 seconds later...

The same command in the udev rule does not exit with 2, at least not from the normal user's interactive environment, which is not the same as the environment that...

I think now I have this working as well as promised. I wrote a custom profile that sets the key colors in groups instead of all, and it reliably sets...

I had the same problem. I was using #267 not the stock version, but it did that same thing. I had to remove the RUN directive from the udev rule....

I get the same error as Flash1704. All I did was install the board and libraries following the directions right from here: https://heltec.org/wifi_kit_install/ (board manager not git) And I get...

I cleaned out all references to the prior install, meaning I removed the previous heltec-esp8266 url from Preferences and manually deleted the directories: ~/Arduino/libraries/Heltec_ESP8266_Dev-Boards (library) ~/.arduino15/packages/heltec-esp8266/ (board) After that, no...

Compiling a sketch actually works. So maybe it's just cosmetic and we can just ignore the messages while in library manager or board manager? I just compiled and flashed the...

> Hello, > Responding to your issue with the index errors: > > > .... > > Then I added that url in Preferences and re-installed the library and board...