BLHeli

BLHeli copied to clipboard

Motor Error rate while using Dshot 600 and Rpm filtering

3

Hi everyone I just built my first drone got it on the bench and am noticing around 2-3% error rate while spinning the motors up in betaflight. I got no...

Bob-lance

I updated a Turnigy 120A HV Opto to BLHeli. Programming went succesful with Arduino in Silabs C2 mode (4way if) Unfortunately - it does not read the esc in Silabs...

gvt70

Really appreciate the improved dShot telemetry accuracy in 32.8.3, plus a question about this data

4

A big thank you for the improved data you can see in the two charts below! The first one is using 32.8.1.2, and the second one is using the (improved)...

jimkazmer

auto telemetry protocol

11

I am trying to read a autotelemetry with an arduino. I was expecting a record lenght of 10 bytes: 1 byte temperature, 2 bytes Voltage,2 bytes Amps, 2 bytes Amps...

pbecchi

Is there a way to get D-sync counts (via telemetry data)?

1

For those of us writing code that controls the ESCs via another program, it would be helpful to get data (like a count of D-Syncs) that we could use to...

jimkazmer

Hi, I'm not sure where to go with this debug and I thought given the nature of the issue, I should start asking for some ideas at the end point...

chronowarper

[BLHeli_32] Applied Startup Sound crashes halfway (-> no communication to ESC possible)

10

Hello there, Last weekend, I built a Cinewhoop and everything worked out fine. As `AIO FC` I chose the **'[BetaFPV Toothpick F4 2-4S AIO FC 20A V4](https://n-factory.de/BetaFPV-Toothpick-F4-2-4S-AIO-FC-20A-V4)'** which has an...

bennobuilder

Compiling with Simplicity Studio 5

2

Unable to compile with simplicity studio 5 I Followed these steps hi, there's no licensing issues with this, it's very straightforward. 1. Download SSS v5 2. install 3. select package...

devanesanandrews

RushFPV Rush_blade_sport_v21 Rev32.8

6

Ok pretty new to the GitHub thing so go easy if I'm in the wrong place. I e searched so this shouldn't be a double post Target: Rush_blade_sport_v21 So I'm...

Linuxbarista

Speedybee ESC "found firmware revision 36.82"

7

 what can i do?

Bigboostfpv