BLHeli

BLHeli copied to clipboard

Hi, I hope this place is appropriate I have a turnigy plush 32 80A I would like to flash with BL heli to get bidirectional control. However, I'm a bit...

nono9212

Simple ESC

2

Has anyone found or made a simple version of BLheli that can be compiled to just run a brushless motor forward/reverse? I was thinking something like a DSHOT setup that...

Andybotjustice

bl esc on slot car

2

Gd day from Italy, we are a group of slot car modeller that are trying to use bl motor on slot car. We kindly ask you if there is a...

mtaddei

32.7/32.83 firmware for foxeer reaper 60a 128k

5

Is it possible to get one of these firmware because I’ve seen some bad things happening on 32.9.

Hrisfpv

I upgraded the firmware on this ESC and started getting badly burned motors. I had been running 32.7 just fine and then I switched recently. It seems to happen after...

Waterclocker

I’m designing an ESC and I have some questions: - Can I use a single MCU (maybe an f3) with enough I/O (about 64) - How many ADCs do I...

dzervas

PWM Frequency issue for Rush Blade 60A Super 96k

2

Hey, I have an issue with the Min and Max PWM frequency, this esc is marked as 24 - 96 khz but i can only set it to 48 -...

qsffffff

BLHeli32.62 - BLHeli suite not always be able to connect to ESCs

10

After flashing the test code, BLHeli Suite is not always be able to connect to the ESCs. It fails to read the configurations after connecting and I'm only able to...

Balint134

Desync on Foxeer Reaper 65A

6

Hello, I just made my new build 5" - ESC foxeer reaper 65A - FC Hobbywing F4 G3 on Falco X - Rcinpower wasp major 2020kv I have problem with...

Benxw

Flash verify failed error - on blheli_s 16.3

37

Guys, I have a serious problem. 16.3 came out, and I flashed my racerstar 30A blheli_s v2 ESC's with G-H-30 firmware. I flashed ok, then I disconected, connected again, and...

blazomusic