bioperl-run
bioperl-run copied to clipboard
bioperl
problem in Installing Bio::Seq, Bio::DB::GFF,
Hi, I have been trying to install these modules using cpan install command. I have installed all the dependencies and my bioperl installation says it is up to date.
But when I try to install these modules using following command
sudo cpan install Bio::Seq or Bio::DB::GFF it gives me follwing error message
Test Summary Report
t/RemoteDB/HIV/HIVQuery.t (Wstat: 65280 Tests: 6 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: Bad plan. You planned 41 tests but ran 6. Files=334, Tests=23870, 119 wallclock secs ( 4.48 usr 0.75 sys + 110.06 cusr 6.90 csys = 122.19 CPU) Result: FAIL Failed 1/334 test programs. 1/23870 subtests failed. CJFIELDS/BioPerl-1.6.924.tar.gz ./Build test -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports CJFIELDS/BioPerl-1.6.924.tar.gz
can someone please help me to solve the issue? Thank you in advance Amol
Hi Amol
This failure shouldn't affect what you want to use. I would do cpan --force install which will put the modules you need where they need to be.
@cjfields, we should probably pull out the hiv query stuff, I will look into it
Mark
On Sun, Feb 07, 2016 at 7:18 AM, amoltej < [email protected] [[email protected]] > wrote: Hi, I have been trying to install these modules using cpan install command I have installed all the dependencies and my bioperl installation says it is up to date
But when I try to install these modules using following command
sudo cpan install Bio::Seq or Bio::DB::GFF it gives me follwing error message
TEST SUMMARY REPORT t/RemoteDB/HIV/HIVQueryt (Wstat: 65280 Tests: 6 Failed: 1) Failed test: 1 Non-zero exit status: 255 Parse errors: Bad plan You planned 41 tests but ran 6 Files=334, Tests=23870, 119 wallclock secs ( 448 usr 075 sys + 11006 cusr 690 csys = 12219 CPU) Result: FAIL Failed 1/334 test programs 1/23870 subtests failed CJFIELDS/BioPerl-16924targz /Build test -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports CJFIELDS/BioPerl-16924targz
can someone please help me to solve the issue? Thank you in advance Amol
— Reply to this email directly or view it on GitHub [https://github.com/bioperl/bioperl-run/issues/36] .[https://github.com/notifications/beacon/AAFAmYBcfLnhMNJtUsxyv2guBkq5hNshks5phy2ngaJpZM4HVE1B.gif]
@majensen we can do that. Though those tests shouldn't be run by default, they generally require explicitly asking for network tests, which can be flaky based on network and remote service availability.
@amoltej did you ask for (or were you prompted for) remote tests when installing?
@majensen --Force install has worked. Thank you for that. but while installation there were several messages saying command not found. Do I need to worry for that?
@cjfields I believe not, Please see below -
CPAN: Time::HiRes loaded ok (v1.9726) Configuring C/CJ/CJFIELDS/BioPerl-1.6.924.tar.gz with Build.PL Do you want to run the Bio::DB::GFF or Bio::DB::SeqFeature::Store live database tests? y/n [n] - will not run the BioDBGFF or BioDBSeqFeature live database tests
Install [a]ll BioPerl scripts, [n]one, or choose groups [i]nteractively? [a] - will install all scripts
Do you want to run tests that require connection to servers across the internet (likely to cause some failures)? y/n [n] - will not run internet-requiring tests Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'BioPerl' version '1.006924' CJFIELDS/BioPerl-1.6.924.tar.gz /usr/bin/perl Build.PL -- OK Running Build for C/CJ/CJFIELDS/BioPerl-1.6.924.tar.gz Building BioPerl CJFIELDS/BioPerl-1.6.924.tar.gz ./Build -- OK Running Build test
@cjfields This is a common problem I think-- when a user wants to just install a module or two, cpan installs the whole distro-- I wonder if there a way to tweak it so that just the desired module is brought down? I.e., without the big reorganization that we all want to do someday.
Unfortunately not easily. I believe @majensen was looking into this for bioperl-run but I don’t know of any precedent dists that do this in CPAN.
chris
On Feb 8, 2016, at 7:10 AM, Mark Jensen <[email protected]mailto:[email protected]> wrote:
@cjfieldshttps://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_cjfields&d=BQMCaQ&c=8hUWFZcy2Z-Za5rBPlktOQ&r=fbHa8Njtvh9VmSnzJxiEUTW9NWDwMMwQAzhgZDO41GQ&m=vQWdwSIk5RXki4sjPut5QxUjrzDM2mGgZwYQiIZau_s&s=2CmYIVpCd2AK0Y34KD-19bOMUv7lI_fU1O0XHHGi-dQ&e= This is a common problem I think-- when a user wants to just install a module or two, cpan installs the whole distro-- I wonder if there a way to tweak it so that just the desired module is brought down? I.e., without the big reorganization that we all want to do someday.
— Reply to this email directly or view it on GitHubhttps://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_bioperl_bioperl-2Drun_issues_36-23issuecomment-2D181359073&d=BQMCaQ&c=8hUWFZcy2Z-Za5rBPlktOQ&r=fbHa8Njtvh9VmSnzJxiEUTW9NWDwMMwQAzhgZDO41GQ&m=vQWdwSIk5RXki4sjPut5QxUjrzDM2mGgZwYQiIZau_s&s=rS6UxDHVy4_7VaEzo6kFIGjtO-VMKTGo3W-LODKX-ns&e=.
Hmm, seeing that it was me making the comment, you may be right!
On Mon, Feb 08, 2016 at 8:25 AM, Chris Fields < [email protected] [[email protected]] > wrote: Unfortunately not easily. I believe @majensen was looking into this for bioperl-run but I don’t know of any precedent dists that do this in CPAN.
chris
On Feb 8, 2016, at 7:10 AM, Mark Jensen <[email protected]mailto:[email protected]> wrote:
@cjfieldshttps://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_cjfields&d=BQMCaQ&c=8hUWFZcy2Z-Za5rBPlktOQ&r=fbHa8Njtvh9VmSnzJxiEUTW9NWDwMMwQAzhgZDO41GQ&m=vQWdwSIk5RXki4sjPut5QxUjrzDM2mGgZwYQiIZau_s&s=2CmYIVpCd2AK0Y34KD-19bOMUv7lI_fU1O0XHHGi-dQ&e= This is a common problem I think-- when a user wants to just install a module or two, cpan installs the whole distro-- I wonder if there a way to tweak it so that just the desired module is brought down? I.e., without the big reorganization that we all want to do someday.
— Reply to this email directly or view it on GitHubhttps://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_bioperl_bioperl-2Drun_issues_36-23issuecomment-2D181359073&d=BQMCaQ&c=8hUWFZcy2Z-Za5rBPlktOQ&r=fbHa8Njtvh9VmSnzJxiEUTW9NWDwMMwQAzhgZDO41GQ&m=vQWdwSIk5RXki4sjPut5QxUjrzDM2mGgZwYQiIZau_s&s=rS6UxDHVy4_7VaEzo6kFIGjtO-VMKTGo3W-LODKX-ns&e=.
— Reply to this email directly or view it on GitHub [https://github.com/bioperl/bioperl-run/issues/36#issuecomment-181365558] .[https://github.com/notifications/beacon/AAFAmWPWW8XwLOdFuzpCvgreu7QrTaOfks5piI7igaJpZM4HVE1B.gif]