SKR-3
SKR-3 copied to clipboard
bigtreetech
No Printer Attached Issue
Hello, I am having the no printer attched issue with my printer. I have an Ender 5 plus with an SKR 3 EZ and a TFT50 V3.0.1. I will provide my configuration.h below but I have followed the manual, and I have gone through every no printer attched post I can find. Nothing helps, my current settings for the tft are Serial Port = 1, Serial Port 2 = -1, Serial Port 3 = 3 as this is what the manual reccomends. I have tried every combination that I can think of but maybe I am missing something. I would appreciate some help. It wont let me upload the .h file so here is the .txt file for config Configuration.txt Configuration_adv.txt
Do you have the same serial speed set? Did you use the correct coneltor? Have you checked the TFT cable to see if it is faulty?
I used the TFT connector and I ohmed the cables, they are good. and yes I have the serial speed set to 115200 on the screen and marlin. Im using marlin 2.0.9.3 does this matter? I read something that says I may need marlin 2.1 or higher.
Yes 2.0.9.3 is an old version, but it should not prevent the display from communicating with the SKR. At most, some functions will not be available.
I just finished building marlin 2.1.2 for the skr 3 ez. I used a premade firmware from btt but marlin has a built in skr 3 ez board. lets see if it works
Update: new firmware didn't solve anything. Still have no printer connected.
Mine wasn't working either, i had the wrong envs selected in Platformio
[platformio] src_dir = Marlin boards_dir = buildroot/share/PlatformIO/boards default_envs = STM32H743Vx_btt include_dir = Marlin
Instead it should be
[platformio] src_dir = Marlin boards_dir = buildroot/share/PlatformIO/boards default_envs = STM32H723Vx_btt include_dir = Marlin
First you need to fix the motherboard in configuration.h It should be for skr 3ez not regular
#define MOTHERBOARD BOARD_BTT_SKR_V3_0_EZ
Error: Unknown environment names 'STM32H723Vx_BTT'. Valid names are 'BIGTREE_GTR_V1_0, at90usb1286_dfu, FYSETC_E4, STM32F103VE_ZM3E4V2_USB, mks_skipr_v1_nobootloader, STM32G0B1RE_btt, mks_robin_lite3, STM32F103VE, STM32F103RE_creality_maple, STM32F103RE_creality, STM32F103CB_malyan_maple, STM32H743Vx_btt, teensy35, simulator_linux_debug, FYSETC_S6_8000, sanguino1284p, mks_robin_nano35, STM32F103RC_btt_512K_maple, STM32F103RC_btt, trigorilla_pro, jgaurora_a5s_a1_maple, at90usb1286_cdc, teensy36, Opulo_Lumen_REV3, mks_robin_e3p_maple, mks_monster8, STM32F103VC_ZM3E4_USB_maple, DUE, LERDGEX_usb_flash_drive, STM32F103RC_maple, mks_robin_nano35_maple, STM32F407VE_black, mks_monster8_usb_flash_drive, teensy41, BIGTREE_OCTOPUS_V1_USB, STM32F103CB_malyan, mks_robin_lite3_maple, mks_robin_nano_v1v2_usbmod, LERDGES, BIGTREE_OCTOPUS_PRO_V1_F429_USB, mks_robin_e3, LPC1768, SAMD51_grandcentral_m4, BIGTREE_SKR_2_F429_USB, STM32F103VE_longer, Artillery_Ruby, chitu_f103_maple, STM32F103RC_btt_USB_maple, FLYF407ZG, STM32F103RC_fysetc_maple,
trigorilla_pro_disk, LERDGEK_usb_flash_drive, mks_eagle_usb_flash_drive, melzi_optiboot, rambo, STM32F103VE_GTM32, mks_robin_nano_v1_3_f4_usbmod, BIGTREE_OCTOPUS_V1_F407_USB, STM32F103VE_ZM3E4V2_USB_maple, FYSETC_SPIDER_KING407, mks_robin_nano_v1v2, PANDA_PI_V29, melzi_optimized, mks_robin_lite, mks_robin_e3p, Opulo_Lumen_REV4, FYSETC_S6, sanguino644p, BIGTREE_SKR_2, mks_robin_pro, STM32F103RET6_creality_maple, mega1280, mks_skipr_v1, mks_robin_maple, BTT_SKR_SE_BX, mks_robin_nano_v3_1_usb_flash_drive_msc, mega2560ext, sanguino1284p_optimized, mks_tinybee, mks_robin_lite_maple, mks_robin_nano_v3_usb_flash_drive, mks_ks_robin_nano_v3, STM32G0B1RE_btt_xfer, mega2560, mingda_mpx_arm_mini, STM32F103RC_ZM3E2_USB, STM32F103RE_btt_maple, malyan_M300, STM32F103RC_ZM3E2_USB_maple, MightyBoard1280, BIGTREE_SKR_2_F429_USB_debug, mks_robin_e3_maple, STM32F401RC_creality_stlink, simulator_macos_debug, jgaurora_a5s_a1, mks_robin_pro_maple, STM32F103RC_creality, STM32F401RC_creality_jlink, STM32F401RC_btt, esp32, mks_monster8_usb_flash_drive_msc, STM32F103RE_creality_xfer, STM32F103VE_longer_maple, simulator_windows, chitu_f103, BIGTREE_SKR_PRO_usb_flash_drive, STM32F401RC_creality, trigorilla_pro_maple, simulator_macos_release, mks_robin_mini, STM32F103RE_maple, linux_native, STM32F103RE_btt, STM32F103VE_GTM32_maple, STM32F446_tronxy, LERDGEK, STM32F103VC_ZM3E4_USB, mks_robin_nano_v1v2_maple, TH3D_EZBoard_V2_no_bootloader, STM32F103RC_fysetc, FLY_MINI, MightyBoard2560, SAMD21_minitronics20, STM32F103RET6_creality_xfer, chitu_v5_gpio_init_maple, BIGTREE_E3_RRF, mks_eagle_usb_flash_drive_msc, chitu_v5_gpio_init, PANDA, include_tree, melzi, FYSETC_CHEETAH_V20, flsun_hispeedv1, STM32F103RET6_creality, STM32F103RC_meeb_maple, STM32F103RC_btt_512K_USB_maple, FLY_MINI_maple, BIGTREE_BTT002, Anet_ET4_no_bootloader, STM32F103RC_meeb, STM32F103RC_creality_xfer, BIGTREE_BTT002_VET6, STM32F103ZE, STM32F103RE_btt_USB_maple, STM32F103RE_creality_smartPro, STM32F103RE_btt_USB, mks_robin_nano_v3_usb_flash_drive_msc, BIGTREE_SKR_PRO, simulator_linux_release, STM32F070RB_malyan, Anet_ET4_OpenBLT, STM32F103RC_btt_512K, STM32F070CB_malyan, BIGTREE_SKR_2_F429, LERDGEX, STM32F103RE, BIGTREE_OCTOPUS_PRO_V1_F429, STM32F103RE_creality_smartPro_maple, mks_robin_nano_v3_1_usb_flash_drive, DUE_USB, STM32F103VE_creality, FYSETC_F6, ARMED, ERYONE_ERY32_MINI_maple, LPC1769, teensy20, BIGTREE_SKR_2_USB_debug, BIGTREE_SKR_2_USB, DUE_archim, melzi_optiboot_optimized, BIGTREE_OCTOPUS_V1_F407, mks_robin_nano_v3_1, STM32F103RC_btt_USB, rumba32, LERDGES_usb_flash_drive, teensy31, BIGTREE_OCTOPUS_V1, mks_robin_nano_v1_3_f4, BTT_EBB42_V1_1_filament_extruder, mks_robin'
Im about to jump off a bridge, downloaded bugfix for the 3rd time tonight and now 723 shows up
No worries, I been through the same thing just trying to help with my little knowledge
TFT is now connecting to my skr 3 ez, you are a lifesaver. thank you for all of your help.
hello i also have the same issue except that my chip matches the environment in platform .io i also cant get the marlin mode working
@giri456 Your description of the problem is too general. Write what HW you have, describe exactly your problem. Send the configuration files for SKR and TFT that you used. Send photos of the cable connection between SKR and TFT
@radek8 Sorry about that, first time on the forums. I am using a skr 3 ez and trying to connect it to a tft24 v1.1 in both marlin and touchscreen mode
For the tft i used the files found here I directly coppied and pasted the ones that were for the tft24.
this is my marlin config converted to text file so i could upload here configuration_adv.txt configuration.txt
i used the default config.ini that is on the big tree tech github for this screen
The default communication speed of the serial port is 115200 for TFT Your Marlin configuration is 250000 You must have the same baud rate configured. (for touch mode)