SKR-3 icon indicating copy to clipboard operation
SKR-3 copied to clipboard

Published 20 hours ago • verified publisher icon bigtreetech

powering raspberry pi over skr 3 ez

Open odbee opened this issue 2 years ago • 4 comments

Hello, it is advertised in the manual and on the website that the skr ez supports powering the raspberry pi directly. I don't see any explanation on this anywhere. I would really appreciate some help. thank you.

odbee avatar Aug 01 '22 21:08 odbee

I believe you may be mistaken- looking through the manual and the website, I see no mention of this.

That said, there are several 5v rails available on the board, you could theoretically use one of these to power a Pi. Personally, I would recommend against it though.

hanzov69 avatar Aug 05 '22 00:08 hanzov69

I don't have any skin in the game here, but taken from page five of the manual in this repo.

The power chip adopts TPS5450-5A, which supports DC12/24V power input. The output current of the chip is up to 5A, and the peak value can reach 6A, which perfectly supports the power supply of Raspberry Pi.

iJebus avatar Aug 06 '22 07:08 iJebus

I have powered my raspberry pi with no issues from the probe power but your mileage may vary.

HTMLdu avatar Mar 27 '23 19:03 HTMLdu

I have powered my raspberry pi with no issues from the probe power but your mileage may vary.

Did you connected to GPIO on raspberry pi? I did this, but there are some warning like 'Under-Voltage Detected' or 'Currently Throttled'

RoCry avatar Apr 19 '23 10:04 RoCry