SKR-2
SKR-2 copied to clipboard
bigtreetech
Hello. I have a problem with the SKR2 board and the RepRapDiscount FULL GRAPHIC Smart Controller display. This is a pixelated image glitch like this.  I was setting delays...
Default steps of 400 for z axis is too low for most common leads. Should be 800, or at least warrants a note in the firmware.
Good evening BTT team, Can we please get updated configuration.h/configuration_adv.h files (& maybe .bin files for common printer models)? The one listed still shows the old BOARD_BTT_SKR_V2_0 instead of the...
Hello together, it seems that the i2c bus of the SKR 2 Rev B is not functional in combination with the "EXPERIMENTAL_I2CBUS" feature of Marlin (Version 02000901). I used a...
I'm trying to use the SKR board with a tft35 v3 and use the USB flash drive from the board, but the Touch Screen Menu only recognizes the sd card...
As I'm sure is the case with many users, I use OctoPrint to control my printer, and once installed in my case, the SD Card slot will not be easily...
Good day. after the firmware I wanted to activate wi-fi. Throws this error. Which is from BTT, which is from teamgloomy. Can anyone understand what the problem is? 18:45:20.169 :...
Use the provided marlin version from BTT github repository and compiled errorfree in visual studio. But when connecting (usb)power showing this (picture). With other wotherboard this lcd works correctly Any...
Hi, i am trying to upgrade my Sapphire Plus (with dual z motors) to SKR2 board, I am trying to find what are the PINs to be set for the...
I had a serial COM connection through USB on my SKR 2 rev A board, I installed the reprap bin from the repository here on github and that was it...
