SKR-2
SKR-2 copied to clipboard
bigtreetech
Hi everyone, I'm building a Mk3 clone with a skr 2 and tft 50 display. My 3d printer reboot randomly after about 10 m and obviously I'm not able to...
Hi, I have installed Second Z motor stepper driver , TMC2209, and uncommented Z2_DRIVER_TYPE TMC2209, and Z_STEPPER_AUTO_ALIGN. in Marlin 2.1.2.1 I am now getting the following error: Marlin\src\module\stepper\trinamic.cpp: In function...
@bigtreetech Hello. I purchased the SKR2 rev b and TFT35 in order to replace the board and screen on my old Anet A8. I have TMC2209 drivers and I am...
Hello, i would like to know what the maximum input voltage of the board is. Unfortunately, i did not find any exact information about this in the manual. It is...
Is it possible to use MULTI_VOLUME feature from Marlin with SKR 2 to use onboard SD card or USB at the same time ? I have tried many things but...
Hi, I have got a strange and annoying issue In my printer. I have a self built core XY type printer with - BTT SKR 2 REV B - TMC...
Hello, I have a BTT SKR2 board and Fysetc TMC2209 v3.0 drivers. The board has Marlin firmware loaded (I've tested on several versions, and same error) to work with the...
I have found the schematic for the SRK 2 but I also need to be able to locate the parts on the board. Do you have a drawing that includes...
collect2.exe: error: ld returned 1 exit status *** [.pio\build\BIGTREE_SKR_2_F429\firmware.elf] Error 1
May I please get some help in configuring the ender3 v2 screen on the skr 2 board? I've tried following this solution (https://github.com/MarlinFirmware/Configurations/issues/535#issuecomment-873010783) but it doesn't work for me (the...
