OctoBTT
OctoBTT copied to clipboard
bigtreetech
OctoBTT
Why don't you get support? I already have the second display of the company btt which cannot be started. Then I have another tft35 which does not boot because of...
Screen Sleep
Hi, Is there a way to configure the screen to turn off itself after 30 minutes of inactivity? If not, it will be a great feature to have inside OctoBTT,...
Using the Pi TFT50 V2.0 with a RasPi 3b, Wifi does not work when the screen is attached. I'm using the standoffs provided with the screen , with a Pi...
I am trying to install OctoBTT on your 5" TFT for Rasp... and it fails completely. Here are the steps I followed from the 'Readme' on this page. Download and...
The assets are downloaded from raw.githubusercontent.com which has valid SSL certificates; if a certificate error occurs that means there is something wrong. Or is the "Great Firewall" damaging your connections?...
My last installation step from install.sh is: `g++ -Wl,-O1 -o OctoBTT accesscontrol.o cameradialog.o configuration.o controlpanel.o customdialog.o filedialog.o gcodedialog.o inputdialog.o liblog.o main.o mainwindow.o materialctrlpanel.o mylineedit.o octonetwork.o terminaldialog.o wlanconfig.o qrc_assets.o moc_accesscontrol.o moc_cameradialog.o...
Hi, OctoBtt runs permanently at 100% Cpu level and blocks everything. Also crashes the print because of blocking. 
As it is this will not work with an Artillery Sidewinder X1 or any other printer with a 250000 baud rate. This really needs to be a configuration option at...
OctoBTT doesn't appear to support PSU Control plugin, thus the web interface must be used to start the 3D printer.