MicroProbe
MicroProbe copied to clipboard
bigtreetech
I measured actual dimensions for   They are quite different from manual https://github.com/bigtreetech/MicroProbe/blob/master/MicroProbe_User_Manual_20230616.pdf: 
I am using Marlin 2.1.x. My control board is Octopus Pro v1.0. When you give the G28 command, the connection between the nozzle and the bed either becomes as it...
I just finished the install on my printer with an SKR3 board. I followed the directions to a T and have triple checked the firmware. Z axis only goes up...
I had to reduce the bracket length by 4mm to get the micro probe to sit 2mm above nozzle also added M2.5 thread for resin printing
The dimensions specified in the manual file and the dimensions of the provided step file are not comparable. Please specify which document to follow for designing a mount. Also, please...
Hi @bigtreetech , My Microprobe is reporting triggered status and impossible to make homing. I have BIQU Hurakan machine as reference, checked wires and configuration. Using Superpinda, using the same...
I have attempted to install a MicroProbe V2 on my Octopus Pro V0 board running Marlin Bugfix 2.1.X, but I can't get it to work. I'm sharing a video of...
Hello, I have an Ender 3 with an SKR Mini E3 V3, and I just bought the Micro Probe V2. I tried both firmware files from the firmware tab, but...
The STEP file has the microprobe included (as if to be printed) and editing the file to remove it shows that it is corrupt underneath. https://github.com/bigtreetech/MicroProbe/blob/master/MicroProbe%20Bracket%20for%20EVA/EVA%20microprobe%20standard%20bracket.STEP 
