Manta M8P with CM4 not found the CSI Pi Global Shutter Camera and no working CSI Display

[Magic2991]

I have problems with the CSI ports for camera and display. Neither the PI Global Shutter Camera nor the display connected to the CSI port work with the Manta M8P+CM4. With an HDMI display it works without any problems, with CSI it stays dark. I usw the pi OS Bullseye.

[looxonline]

You need to install the overlays on the CM4 to enable the camera and the screen which has nothing to do with the manta. https://www.raspberrypi.com/documentation/computers/compute-module.html#sources

[NegussugeN]

I have problems with the CSI ports for camera and display. Neither the PI Global Shutter Camera nor the display connected to the CSI port work with the Manta M8P+CM4. With an HDMI display it works without any problems, with CSI it stays dark. I usw the pi OS Bullseye.

Did you ever make any progress on this? Having the same issue myself.

[Turge08]

The location of the dt-blob.bin is wrong. It needs to go into the /boot/firmware folder:

sudo wget https://datasheets.raspberrypi.com/cmio/dt-blob-disp1-cam1.bin -O /boot/firmware/dt-blob.bin

[Jellypowered]

The location of the dt-blob.bin is wrong. It needs to go into the /boot/firmware folder:

sudo wget https://datasheets.raspberrypi.com/cmio/dt-blob-disp1-cam1.bin -O /boot/firmware/dt-blob.bin

THANK YOU. This fixed my BTT PITFT43.

[Superflyron]

I wanted to thank you very much, I tried everything possible for two days without success. Your solution worked right away, you should forward it to bigtreetech, because it is wrong in the description.

[Turge08]

I wanted to thank you very much, I tried everything possible for two days without success. Your solution worked right away, you should forward it to bigtreetech, because it is wrong in the description.

I notified them about the error. It's related to a change in the newest version of Raspbian btw (bookworm).