Manta-M8P icon indicating copy to clipboard operation
Manta-M8P copied to clipboard

Published 20 hours ago • verified publisher icon bigtreetech

Unable to flash Manta M4P

Open Gabriel121217 opened this issue 1 year ago • 3 comments

I am having difficulty flashing the MCU of the manta M4P. I have tried the following

  • compiling klipper myself and using SD card slot (full size SD card)
  • used the precompiled bin file on the github (full size SD card)
  • tried using DFU mode (when i try to get the ID, it says "usb-Klipper_stm32g0b1xx_hurakan-if00")

I have renamed all the bin files to firmware.bin.I am quite stumped and not sure what else to do. It was powered by 24V bench top power supply. The CB1 i am using has been flashed and I can access the online GUI of mainsail.

Gabriel121217 avatar Nov 07 '23 07:11 Gabriel121217

Make sure you are using the correct SD card slot or try using kiah https://github.com/bigtreetech/kiauh

fish1942 avatar Nov 07 '23 10:11 fish1942

i have tried flashing from both SD card slots. which one should be the correct one?

Gabriel121217 avatar Nov 07 '23 12:11 Gabriel121217

The one on the top of the board

fish1942 avatar Nov 09 '23 08:11 fish1942