m8p / cb1 extruder not working

[lkelley52]

can not get the extruder to work. if i plug the extruder motor in to one of the axis’s motor it moves . so motor is good. i have the extruder plugged into motor 5 on the board. i have checked wiring. no breaks and wired correctly, board pins good.

Motor5 [extruder] step_pin: PG13 dir_pin: PG12 enable_pin: !PG15 microsteps: 16 rotation_distance: 33.500 full_steps_per_rotation:200 nozzle_diameter: 0.4 filament_diameter: 1.75 heater_pin: PA0 # HE0 sensor_pin: PB0 # T0 sensor_type: Generic 3950 control: pid pid_Kp: 22.2 pid_Ki: 1.08 pid_Kd: 114 min_temp: 0 max_temp: 250

klippy (3).log